9651

Any reason that this wont work? Never tried it before. Got an existing NVR connected to the subs network, all straight forward. He has asked if he can view it on his TV. In the lounge he has Apple TV, so i cant see any reason that I cant stream the CCTV app from his ipad via airplay to his TV? Thoughts?

Thanks, I know they had to be separate for 2004, not sure if there was any changes for 2010

As in can you still use one rf device to set unset, and another dedicated unit with just two button hold up? Not sure with 2010 implementation.

can you get these with current regs, rf setting device with sos buttons? I'm thinking no?

Just had a look through my notes. It should as James said send a tamper now if set, not an unconfirmed. However, if another detector triggers in the confirmation window it will send a confirmed is how i intemperate it? I'm going to try it on a RI tomorrow,

Id say confirmed without checking anything

email addy?

12v I'd lean towards the 2.8 ah

*Usually* would be a 2.8ah But either the above or a 2.1 will suffice.

are you trade fella?

All points can do different things in the different programmes. For P3, make all zones unused bar the garage, enable the setting option to either timed or instant. Job done.

Push on connectors Look no further.

yes

bit like the situation we're in. We have lots of iD out there, i cut my teeth on Karizma + and the 690 iD. But we as a co, we haven't fitted iD for a good 8+ years now, so now training up the new lads on obsolete panels/wiring does have its issues.

Receiver no or account no all removed? And you 100% should not have the powers connected together.

The clues in the name, 2-20, so 20 zones max. That can be a rf portal on the panel, 12 hard wired or wire free, or add a rio/ power rio giving 20 hard wired zones, or 20 rf zones. If the cable is cut it will either tamper the house alarm if unset, or if the system is set it will trigger the bells. You could keep the panel separate in the garage, get a relay to follow the bell, then strap a galaxy rf wired door contact to it, then say prog that as 24hrs at the house, call it garage, then it will SMS you that the garage has triggered.

Can't remember do they have a strobe on set output? If so maybe this pluses some kind of sounder. We have a few out there and I don't remember there being a set confirm on them tbh

ive got a wireless mouse on some ching chang thing in my house. Works fine!

Yea sorry i know all that, its pretty simple to set up stand alone. Was more in relation to say integrating with Intruder to arm/disarm, much experience?

FLol, for what reason? Its a bit old school, but you get good range, battery life etc? WHat did you replace them with?

Ha, really? We've used it before onto an adpro without any real issues? Anyone else who uses it with their 10 pennith?!

Does anyone use this set up? Just after a bit of general info about integrating

Think about it A camera that's say under 200 is going to have **** resolution/night vision. So you install said camera with its soft fuzzy picture, yeah it might give you a picture, but what's that going to achieve when someone's breaking into your shed and it can't give you any identification? The only thing it'll achieve is a if only.... Buy cheap buy twice.

Its not industry specific like AM. Our hands are tied by our bigger sister co. They are in the process of changing to a new management interface (cant remember the exact name of what we will be using as its a good 6 months off yet) I need to find out weather there are any bolts on with this software we will be using.

Were just looking for something for PM/CM dockets really, then just send to office