9651

Chubb

thanks James what’s your thoughts on the following? Existing policed system supposed to be grade 3 (not a chance it is imo) Anyway, Galaxy Area on a wing in a Statley Home is being armed / disarmed by this shunt lock alone No local sounders - only one entry exit into the area via this door with the shunt fitted. Currently programmed as keyswitch - 5 second exit. Only one Keypad fitted which is in the main body of the house I’m think this area should have two stage arming - lock programming changed to final - area changed to final set with a local sounder to confirm setting. Keypad then fitted inside the protected area to facilitate disarm on entry - as the lock now programmed as final will disable confirmation on entry Or, am I over thinking it? 😂

Evening all Shunt locks Can't find anything about a "graded" shunt lock We don't fit them, (well I have but donkeys years ago) but have one on a current takeover Presume this calls up Does this calls up an existing BS4737 standard or something in 50131? I can't seem to see anything about locks though 🤔 BS8243 permits a shunt lock for completion of setting - but wondering where we are in terms of component grade? Many thanks

G2 is near obsolete now, limited panel anyway imo

HV is holdup confirmed

Grading, if using mask/fault reporting you'd need to hang about 3 busicuts out of each detector We tend to go texe route and give the customer he choice . If it's an upgrade for say comms, rewire/configure as much h/w as possible, then add wireless if required

So just to pick up on this, there's nothing stopping me getting AM licence for this for one workstation for instance does AM work well in keeping track? Presuming you can add warning letters, and it has some kind of 12monthly rolling database where they will automatically reinstate the level? im sick of the outdated crappy spreadsheeets we use I want something that just works tbh, keeping track at any warnings received and if they have been escalated to level 3. Granted we don't get hardly any but it's such a long winded way keeping track Any feed back on AM handling this would be great, unless there's any alternatives? thanks

You got the switch in the correct range?

I was hoping there was something that I could just use stand alone as this is the only thing that I can't really intergrate with the DAtabase we currently use ideally we we would use mentor/alarm master but it won't happen with how we are set up from our electrical arm

These must be conflicts or something? Unplug and try one at a time?

Not got any issues as yet, got quite a few out there now infact we are finishing off a 60 cam install at the mo, no issues as yet mixture of wedge cams and bullets

Evening what are you guys using to keep track of urns etc? As we are part of a lager organisation we don't use industry specific alarm management software, we are tied to HQ's by ISO was management software so things like this are on spreadsheets still, which is a pain and needs updating Is there anything "off the shelf" that can keep progress of warning letters/ lost response etc?

you do realise a home control will do all via an app?

So sia event from the intruder? Like system open? Ive seen the demo of your office

Hi jim, is is there any set up guides for this? Something I want to look into when I get ten mins :-) dahua Intergration would be good

You can do either gprs, ip or both, so can't see that ever being an issue

Just push never missed a beat, I have it on our office for test/Demo and it's useful for clo/op notifications

If it's not monitored, just use conxtd via Webway Push notifications to smart phones showing op/clo, or log in via browser for more detailed reports no brainier if it's not monitored

Works well. We have a few out there now, and have our office down for demo purposes, sells itself for the custkmers who want system to "txt" we steer them this way Have them on gal and texe. push notifications etc, much better than the Texecom app for instance, Can be used stand alone for customers who don't want arc, or in conjunction I did hear a whisper they're developing remote arm disarm??

Intergrates well with third let equipment it's now our go to panel for combined intruder Cctv, couple of ricochet expanders and external gjd's, works really well flush keypads look good too (llcdp)

id have one over any 2 Series galaxy any day. Do you not find UDL a bit flaky also?? Much better suited over a GD gal in a domestic imo. Though they cant match a Gal for robustness

Its a lovely bit of kit webway& texe combo. I actually want us to ditch G2 galaxy for a poly prem as it UDL's MUCH better than 2 series galaxy

i was under the impression it was 'kinder' to switch a ov, ie less of a spike so to speak???

Ive yet to fit a confirmed HU on a new install....... had a couple where weve lost URN. We had a site that the PAB's got soaked under a bar and went high res one night and it got policed X2...... so just set up HV on the galaxy and instructed the ARC

G2 has no double knock, must be the only panel out there that doesn't.