User Manuals

Hi,Im getting new windows and doors soon, and i need to know how to disarm my system so i can remove tiles from my bathroom window.The alarm keeps going off. I have the [ENGINEER CODE] and the installation manual which provides basic programming. The book was here when I moved in to the house last year.As ive never been told anything about the system other than the owners alarm code I feel I could do with some help.The manual provides a programming map but not instructions on how to make changes to the system. The log keeps saying [ TAMPER] ps I am a very capable person .this is not rocket science.

Hi Guys, Well hoping someone might be able to advise/help. I have just been donated (as part payment) two box loads of professional security equipment, so I am now trying to gather the user manuals before I can sell them on. The one I am having trouble with is the: VSL Maxcom 8/2 Video Control Unit - Has a joystick plus loads of buttons. Would any kind person have any manuals for this, also an indication of value would be great. Many thanks Graeme

Hi, I've recently moved into a new house which has the Veritas 8c alarm, I've worked out how to change the codes etc (thanks to this site!) just one problem: I had an engineer out because the alarm went into maintenance mode, he reset it to factory settings but didnt have a manual so didnt know (or have time to) set it up again. Ever since the entry zones or timings have been incorrect, now when I open the door I dont get any time to type in the code, the alarm just goes off! for the time being I've been disabling the door zone using the omit feature but was wondering if this was something you guys could help with? I'm aware you can't give out the engineer manuals e…

Hi, I need the manual of an old control panel named 'Active5' in order to replace the accumulator. Please send it to [edited - user manuals can be collected from a post link] Thanks, Joaquim

Hello there I am looking for information on the melcom st6550 alarm Firstly looking for a way to program a new entry code as the current code has been lost and the user manual

I've had an Accenta alarm fitted for approximately 10 years. My girlfriend did something to it whilst I was out & now everytime you walk into the kitchen the PIR detects you & the keypad beeps. I presume she has somehow locked zone 5 into test mode? How do I stop this? Neil

I just bought an Aritech CS series alarm and had it installed in my house. It came with a pretty flimsy user manual, but the installation engineer insisted that was all there was. Hmmm, right. I have read the engineers versus owners discussion on this forum and (obviously) tend to believe that I am entitled to a decent manual that should come with the unit. Yes, I am aware that I could totally screw up the system (although settting my house on fire or get electrocuted are consequences that I believe a little far fetched) but that would also be my own responsibility, just like if I tamper under the hood of my car. So my question boils down to if someone has a decent man…

Hello all and Merry Christmas and a Happy New Year. I am a newbie to this site and have recently been looking after my neighbours cat. This has caused no end of dramas, least of all with my alarm. I have looked through the user manual and correctly isolated the rooms downstairs for when my wife and I leave the house and the cat remains in, however in doing so (lots of attempts!) I have caused the TAMPER LED to light on the panel and also the internal sound to come on when movement occurs in any of the rooms. This is not the overall alarm just a 'beep' when the sensors detect movement. My question is this......... how do I get rid of the inside sounds and Tamper LED? …

Hi, Could you send me the instructions/manual for the Optima XL6? I have just moved house and there are no instructions! Thanks Rachel

I tried searching for it. But the webpages require a membership with cost. Anyone have this? Thanks!

Got an SL Compact and no manual although did download an SL8 user manual that at least allowed me to change the code from 0123 (only 2 years on that one - but a break-in to a neighbour made me think it was time to change the code). Think ther is only 1 program been set-up but would like the other two set up as well (one for night time so the upstairs PIR is off and the other for when my wife is in own her own - say alarm only back and front door). Is this some thing I need an engineer for or can anyone point me in the right direction?

I need a bit of help with this one ive been working on intruder systems for the past three years and have never come accross one of these usualy working on gardtechs how do I reset it BACK TO FACTORY settings someone said link out two of the connections but they did'nt know whitch ones.

Hi. Does anyone have a user manual for the ATG Series 6000 control panel? I've just moved into a house that has one. I have the user code but have no idea how to change the code or even set the alarm (putting the code into the panel seems to set off the alarm after a short period even if I've left the house and locked up! ). Also does anyone have an idea if this control panel can be used to dial a number if the alarm goes off? Thanks in advance.

Hi everybody, My client has RAIMANN C-2000 door keypad. It's installed may be 10 years ago. Does anyone know the item? I need manual for it to programm new codes.

Any chance someone will kindly forward me a copy of the Windsor CA500 user manual. I desperately need to reset some users alarm codes. Thanks. Send to: peter.hamer@gp-p81681.nhs.uk