Introduce Yourself

Hi All. Just a quickie to introduce myself. Independent security consultant with over 35 years experience in the intruder, CCTV, and Access Control systems. So if any one wants to chat or needs a client to take some advice just drop me a line. Chat soon Gary *edit jpw

Will chat soon. as busy right now.

HI guys . my name is Gavin and work at beny Vision , we are manufacturer of cctv cameras in China. *edit jpw

Hello guys, I am an enthusiastic DIY guy.. I am hoping to learn and share knowledge in this community. Regards

Only been in the industry a few years, have spent most, of my many! years, working in IT. Can;t seem to stay away from the world of IP! Great forum, lots of good info not sure if I can add much but I'll give it a go.

Good Morning everyone, I've been a forum member for a while but became a bit inactive with my posting so thought I would try and use the site a bit more. I'm located in the southeast part of the country and after completing an apprenticeship with my company (One of the better nationals in my opinion) have been a fully fledged installation engineer for the past 3 1/2 years. Oh and my names Brad

I'm a sparky more than an alarm engineer, although I do probably 4-5 installs a year. Most systems now seem to involve security cameras & recording too. Signed up for the occasional bit of support from the experts out there! Hope I can contribute back in some way too.

Hello ,kamusta, how are you, im a Pilipino general technician thank you for accepting me as one of your members hope i can post very important topics someday here, once again thanks to all... MORE Power to admin...

4. Aug 16, 2013 9:22 AM (in response to hacman) Re: Chubb Sentinel CA67 alarm panel Hi, I have I believe rebadged Guardal Rascal Super & ACTIVE5 to Chubb Sentinel CA67 integrated single panel system but HAVE NO UC. The mains & Day only LEDs are ON. I also have bought the user, engineer manual and HAVE the EC. The system is in Quiescent mode. PIR detect ok. I do not want to trig alarm but if it does how can silence it (Internal or External) using the EC ? Is it possible to: 1. Just to test the EC code only without opening the panel and since no change just # to EXIT Eng mode ? OR HOW TO use tamper cct to timeOUT itself ? 2. How do I differentiate between…

Hi all I'm looking for a little advise I have decommissioned a site and the client has kindly given me the equipment to sell on and I am looking for the best place to sell. Any ideas or information greatly received

Hello, I am Jim Lovett and I am from Pyronix and Castle Caretech. I am new to the TSI site but hope to stick my nose in and help out where I can. I look forward to chatting with you all soon. Regards, Jim Lovett

Hi all, I just happened to read a few threads on this website and wondered how i have not come across this site before. Such a valuable and informative forum. My name is Rooz ( I know quite strange name ) and I work for a small security and CCTV firm in London. Hope to get to know some of you better through this forum. If you tweet, join me on twitter Thanks for reading. Quick Response CCTV Ltd

Hello, I keep seeing the security installer website and thought i would finally join. The name is Simon and have been an electronic security engineer for about 15 years (grade 1 ). I recently left one of the big security companies to start installing for myself (only took 10 years to grow some balls and do it!)

Hi There - I was looking for the contact for Dale who has offered a wiring diagram on the Rokonet PIR - I see he has already assisted some one with the wiring. The PIR has the following: 2 x alarm inputs, 2 x tamper inputs and a negative and positive input. The brochure does not at all state how this must be wired. It also has an input for a jumper near the leds. Please assist. Much appreciated. Jeeva *edit jpw

Hello everybody. I am new to this forum, I sometimes get asked to install security systems, CCTV and door access control for my customers and this forum looked like a good place to ask a question and possibly get the answers as I am well and truly stuck. here goes. I have a customer who requires me to replace there existing CDV door entry phone system that is failing due to validation, with a new Siemens Bewator Si-BM3 door entry system next week, this is not the problem as I have fit loads of BM3's with no problems. However the problem I do have is that they have a Digiprox DGLPWLC proximity reader (square thing about 4" x 3") installed above the door en…