Oli_me Posted December 14, 2017 Share Posted December 14, 2017 Hi, I know it's a long shot and a bit vague, but does anyone know how to wire in a klaxon master blaster to a texecom premier elite 12/24? the main part that i'm struggling with is which terminals to connect the wires to the panel, and how to program it to work. Someone said that I need to wire the positive into one of the digi outs!? Thank you in advance for your help Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/ Share on other sites More sharing options...
PeterJames Posted December 14, 2017 Share Posted December 14, 2017 Why would you think its a long shot? I suspect that most on here would know how to do it Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472299 Share on other sites More sharing options...
datadiffusion Posted December 14, 2017 Share Posted December 14, 2017 Been done before, though tricky. Below is a simplified version of the more popular interface sold by Bentley, suitable for home production; So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472300 Share on other sites More sharing options...
Oli_me Posted December 14, 2017 Author Share Posted December 14, 2017 19 minutes ago, PeterJames said: Why would you think its a long shot? I suspect that most on here would know how to do it Long shot because I was let down by the person who installed the alarm, and guess I don't feel lucky that I'll get it sorted online fingers crossed though Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472301 Share on other sites More sharing options...
Oli_me Posted December 14, 2017 Author Share Posted December 14, 2017 10 minutes ago, datadiffusion said: Been done before, though tricky. Below is a simplified version of the more popular interface sold by Bentley, suitable for home production; Thank you for your reply. I don't follow the attached pic, not sure we're on about the same thing!? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472302 Share on other sites More sharing options...
james.wilson Posted December 14, 2017 Share Posted December 14, 2017 Give it 240 and wire the relay to the bell output. Or Give Texecom a call Both products are under Texecom now securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472303 Share on other sites More sharing options...
Oli_me Posted December 14, 2017 Author Share Posted December 14, 2017 3 minutes ago, james.wilson said: Give it 240 and wire the relay to the bell output. Or Give Texecom a call Both products are under Texecom now I've got it connected to the 240, and on the master blaster side black to negative and red to positive. there is a wire already connected to the "bell" terminal and didn't was to over load it. plus why would someone say it needs to be connected to the digi outputs? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472304 Share on other sites More sharing options...
sixwheeledbeast Posted December 14, 2017 Share Posted December 14, 2017 32 minutes ago, datadiffusion said: Been done before, though tricky. Below is a simplified version of the more popular interface sold by Bentley, suitable for home production; Ah, you can't beat one of those good old fashioned tube valve interfaces... 25 minutes ago, Oli_me said: Long shot because I was let down by the person who installed the alarm, and guess I don't feel lucky that I'll get it sorted online fingers crossed though That's unfortunate, have you tried to contact another engineer? It's not quite as simple as sticking wires in terminals... Lets start with the fact a PE12 and PE24 are two different panels so wire program differently, also we don't know what model Klaxon you have there are different types. Then even with the correct kit you will need to go into the engineers menu which any reputable installer will have his own code so you wouldn't be able to access. Follow this with locating an output that can handle the current from the blaster, would have to check spec sheets for panel and blaster. When in engineering menu you would need to set an output (all should sink negative on the small Texe panels) to follow the bell with a reduced trigger time so not annoy the neighbours or burn the blaster out. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472305 Share on other sites More sharing options...
al-yeti Posted December 15, 2017 Share Posted December 15, 2017 12 hours ago, sixwheeledbeast said: Ah, you can't beat one of those good old fashioned tube valve interfaces... That's unfortunate, have you tried to contact another engineer? It's not quite as simple as sticking wires in terminals... Lets start with the fact a PE12 and PE24 are two different panels so wire program differently, also we don't know what model Klaxon you have there are different types. Then even with the correct kit you will need to go into the engineers menu which any reputable installer will have his own code so you wouldn't be able to access. Follow this with locating an output that can handle the current from the blaster, would have to check spec sheets for panel and blaster. When in engineering menu you would need to set an output (all should sink negative on the small Texe panels) to follow the bell with a reduced trigger time so not annoy the neighbours or burn the blaster out. What you mean handle current ? On the texes don't they have something that can switch a relay as standard ? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472312 Share on other sites More sharing options...
sixwheeledbeast Posted December 15, 2017 Share Posted December 15, 2017 Who said anything about a relay being supplied? That would be additional kit if required. Only PE88 upwards have an onboard volt free relay which can switch upto 3A. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41804-klaxon-master-blaster/#findComment-472313 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now