Jump to content
Security Installer Community

Texecom Ricochet install advice


matt-289

Recommended Posts

23 hours ago, datadiffusion said:

 due to mesh commissioning, don't enrol until you're on site with devices!

 

I'm curious why you think it's a problem.

Every ricochet system I've ever installed is programmed, all devices learned and tested up to 72 hoursI generally on a plug top and a 7ah whilst under test.

 

I've never defaulted a system once all learned, it's pointless waste of time.

I always leave batteries in everything during transit to site, even the Panel battery.

As long as you follow the correct procedure on site with lids off everything and give time for a secure stable mesh to build, verify mesh integrity on ricochet monitor you're all good. That's the beauty of this kit as you know, It will always adapt to the environment and create its own best route back to the Panel.

 

Not sure on what everyone else's own procedures are... 

But there's no way I would turn up to a full ricochet install with nothing pre programmed and function tested in advance. 

 

Be be interested in others thoughts on this. 

Link to comment
Share on other sites

Quote

As long as you follow the correct procedure on site with lids off everything and give time for a secure stable mesh to build, verify mesh integrity on ricochet monitor you're all good. That's the beauty of this kit as you know, It will always adapt to the environment and create its own best route back to the Panel.

 

This is the key to it

amealing@texe.com

Head of Industry Affairs

Visit Our Website
Texecom

Link to comment
Share on other sites

Thanks for your help everyone

 

Got the system up and running today with no faults

 

Took a while to get my head around the setting up procedure and having to change the sensor settings for entry/exit, guard etc.... but seem to have got there in the end

 

So now she wants me to get her an internet sounder ( not a speaker as in my previous post )

 

Could somebody point me in the in the right direction for what I need to purchase, and also the correct way to connect one of these into the panel, I've taken a cable from the panel to the point where the speaker is going already

 

Thanks very much

 

Matt 

Link to comment
Share on other sites

  • 2 weeks later...
On 22/02/2017 at 4:58 PM, datadiffusion said:

Ok, that's only got 4 wired zones (better than none!) although you can use an expander.

Or six if you consider the 2 zones on the RKP as well 

On 22/02/2017 at 4:58 PM, datadiffusion said:
On 22/02/2017 at 4:58 PM, datadiffusion said:
On 22/02/2017 at 4:58 PM, datadiffusion said:
Edited by Prodigious

Thrones

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.