You'll be using a lighter to solder next Jeff

Sounds like a plan.

OK! Peter sussed me. But I have been known to drill a 20mm hole in a YT2 lid and place it inside the transom of a Ali door to hold down a flush contact

We always mount cameras so that they cannot be sabottaged by lifting the ceiling tile.

We always mount cameras so that they cannot be sabottaged by lifting the ceiling tile.

you wire in armour flex and fix cameras to grid

both are ****,

 

however the bare twisted joint for the cam's power wins the rosette for shoddiness ?

I have yes, two bits of trunking though

And i was the pro, the others would use red raw plugs!

If you were any good you would only need one!

you wire in armour flex and fix cameras to grid

We dont use armour flex we do fix to the grid or across the grid, I have seen lifted tiles with 360 pirs attached in the past

Tut tut!, I thought the nacoss gold boys were a higher standard and compared silver to ssaib?

Just proves that this whole industry needs sorting IMO so everyone works to a standard.

It is just a joke now with all these rules.

We need one governing body that companies work to the rules.

Tut tut!, I thought the nacoss gold boys were a higher standard and compared silver to ssaib?

Just proves that this whole industry needs sorting IMO so everyone works to a standard.

It is just a joke now with all these rules.

We need one governing body that companies work to the rules.

Standard. Anyone know what it means? 50 systems before approval process or 3. Who cares when either way you get authorisation to do the same thing. If you have to compete with someone offering your customer base a 50% undercut then something is likely to suffer.

If you were any good you would only need one!

It was a PTZ.