james.wilson

as 6wb id rely on a multi meter first

yes but as it 50v cable lower the insulation test good cable will give 10 ohms per hundred

6. <fill in here>

whats the upgrade cost??? it will be about 8k less

on a serious note whats your beef?

press * when selecting the zone type

set the input keyswitch and pulse type (enable the * modifier), then just use the switch dc output type on the source panel it will only then arm the other system not disarm

from me experience domestics think monthly fees are a rip off (apart from sky, amazon etc) and that a voice dialler is a grade 4 comms device for free

no polling or path integrity checking, no audit trail leaving installer open to failure to perform claims on insurance etc etc

definitely got a computar zoom lens

I might have one in service stock

you will have to reenroll every device

when the tamper circuit is ok there will be 0v at the tamper return terminal

so you got the cameras from adata?

hangon is this adata the one that as provided the camera stuff or at they the it co?

no meaning it could be a data problem. As above follow the advice of removing both keypads and use one on a new short temp wire

agreed but that needs target camera for audio they tend to use the global output real world stuff not what you ask

you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik

hik doesn't do broadcast audio like that it needs to use the audio out for most arc's. Its a shame you cant set the cams audio out to be global

they may also be worried about bandwidth so slow the fps down and look at an acceptable bitrate

ok Yes I think its a good diy option and a panel that will do what you need. Its stable kit but you think a 'spike' has killed your current one But be careful on current load (2 bells in sab mode) and you should be fine

bit of advice, don't get funny with those you want free help from but there are bodies that inspect installers I would go down that route first If your going down the diy route give Texecom tech a call they will help you with product choice without using tsi

I do think its a bit unfair to get an installer from gumtree then assume pro installers are the same

powerful in a digester

no c'mon be serious its a north korea unit vs a bag of walnuts