Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,643

  • Joined

  • Last visited

  • Days Won

    287

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    on a serious note whats your beef?
  2. james.wilson
    press * when selecting the zone type
  3. james.wilson
    set the input keyswitch and pulse type (enable the * modifier), then just use the switch dc output type on the source panel it will only then arm the other system not disarm
  4. james.wilson
    from me experience domestics think monthly fees are a rip off (apart from sky, amazon etc) and that a voice dialler is a grade 4 comms device for free
  5. james.wilson
    no polling or path integrity checking, no audit trail leaving installer open to failure to perform claims on insurance etc etc
  6. james.wilson
    definitely got a computar zoom lens
  7. james.wilson
    I might have one in service stock
  8. james.wilson
    you will have to reenroll every device
  9. james.wilson
    when the tamper circuit is ok there will be 0v at the tamper return terminal
  10. james.wilson
    so you got the cameras from adata?
  11. james.wilson
    hangon is this adata the one that as provided the camera stuff or at they the it co?
  12. james.wilson
    no meaning it could be a data problem. As above follow the advice of removing both keypads and use one on a new short temp wire
  13. james.wilson
    agreed but that needs target camera for audio they tend to use the global output real world stuff not what you ask
  14. james.wilson
    you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik
  15. james.wilson
    hik doesn't do broadcast audio like that it needs to use the audio out for most arc's. Its a shame you cant set the cams audio out to be global
  16. james.wilson
    they may also be worried about bandwidth so slow the fps down and look at an acceptable bitrate
  17. james.wilson
    ok Yes I think its a good diy option and a panel that will do what you need. Its stable kit but you think a 'spike' has killed your current one But be careful on current load (2 bells in sab mode) and you should be fine
  18. james.wilson
    bit of advice, don't get funny with those you want free help from but there are bodies that inspect installers I would go down that route first If your going down the diy route give Texecom tech a call they will help you with product choice without using tsi
  19. james.wilson
    I do think its a bit unfair to get an installer from gumtree then assume pro installers are the same
  20. james.wilson
    powerful in a digester
  21. james.wilson
    no c'mon be serious its a north korea unit vs a bag of walnuts
  22. james.wilson
    hi
  23. james.wilson
    it would be
  24. james.wilson
    plus add in that risco is 'value' in its main line. However their better sensors and bells are decent.
  25. james.wilson
    eurosec is risco 'value' line. I doubt any of the trade members have one in their own houses
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept