james.wilson

you will have to reenroll every device

when the tamper circuit is ok there will be 0v at the tamper return terminal

so you got the cameras from adata?

hangon is this adata the one that as provided the camera stuff or at they the it co?

no meaning it could be a data problem. As above follow the advice of removing both keypads and use one on a new short temp wire

agreed but that needs target camera for audio they tend to use the global output real world stuff not what you ask

you can but that's per channel audio. Ive done it using the audio out and a powered horn, but wont work well with an arc afaik

hik doesn't do broadcast audio like that it needs to use the audio out for most arc's. Its a shame you cant set the cams audio out to be global

they may also be worried about bandwidth so slow the fps down and look at an acceptable bitrate

ok Yes I think its a good diy option and a panel that will do what you need. Its stable kit but you think a 'spike' has killed your current one But be careful on current load (2 bells in sab mode) and you should be fine

bit of advice, don't get funny with those you want free help from but there are bodies that inspect installers I would go down that route first If your going down the diy route give Texecom tech a call they will help you with product choice without using tsi

I do think its a bit unfair to get an installer from gumtree then assume pro installers are the same

powerful in a digester

no c'mon be serious its a north korea unit vs a bag of walnuts

hi

it would be

plus add in that risco is 'value' in its main line. However their better sensors and bells are decent.

eurosec is risco 'value' line. I doubt any of the trade members have one in their own houses

you did? sensors ish and bells only imo

pulsar was da yes

don't its one way and cheap

I can see your point but it was a bottom end system then. But as its been totally fault free for years then its worth sticking with.... oh wait If it was anything else, fridge, telly etc what would you do?

afaik Everest use HKC now

really?

no its not a pulsar looks like a hkc plastic to me