al-yeti
-
Posts
9,132 -
Joined
-
Last visited
-
Days Won
116
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by al-yeti
-
-
Ok so why not setup a company and go on training g course and then apply for an account and course with them?
-
I feel like making a site like that for intruder to, first thing deal with badges!
-
I still think this is satel breaking into u.k market they do try and sell here I believe, if it isn't , it's not a bad way to keep the satel links up instead of being blatant lol
why not just ask the rep from satel?
They seem to have a tech support manuals etc etc
Could be wrong of course I am tsi affected
-
Not you arf lol I didn't really mean anything by it
You need to stick the panel on a bench with sensors and play with system is probably best way
-
This all starting to look more like a sales pitch ?
-
Where does it say preAlarm?
I thought prealarm was only on smokes?
-
Drill hole on side fill with expanding foam to make it quieter customer pays of course
-
First decide on panels or panel your going to use , some allow different values on each zone some are fixed values for the particular panel
Then you will see what value is best
On an electronics point of view, I assume lower values example 500ohms may make things difficult to detect, faults tampers etc hence why higher values are used or no resistor with seperate tamper loop
Experts may correct me here
-
Honeywell still solid commercial panel, but it's falling behind for residential fast
-
-
Adt full steam ahead with visonic? so they will produce and adt will keep buying?
-
Thought it had three groups , two plus common
But better of with g20 for more outputs
-
There are a few here, let them get out of bed in case it's a half day for them lol
Nah just kidding about half day, but there's a few here or go-to
-
Sounds as though either engineer reset or a service issue
-
Train you for what?
PerhapS try
http://www.tavcom.com/distance-learning-courses/intruder-perimeter-alarms/
And others
-
Hi
Yeah it's true only knowledgeable hard-core dieharding nerdy wire men left here on tsi from what I see
Still they teaching me, but I just dont get it !
-
Here's another
Pir position?
-
Today we have been 1st fixing intruder on a brand new build on a retail park in Dundee.
Sparky on site is fitting the fire alarm.
He thinks sticky pads and plasic ties meet the standards as 99% of his cables are fixed this way. No wonder we can't compete with these guys.
We're you matching the intruder with fire cable from sparky ie the one above?
-
No reason why not
-
The Premier is not, not, NOT a DIY panel!!! It is BETTER than honeywell galaxy for ALL installations! The Veritas, I agree, is DIY and I do hate the transformer, but the Premier is the best panel on the market today.
NEVER JUDGE A PANEL JUST BY ITS INSTALLATION MANUAL!
The way the manual is written does not "automatically" influence the quality/excellency/"professionality" of a panel. It is simply telling you how THAT panel works and how you connect the zone wiring to THAT panel!!!
What about judging Op by his post?
However premier must have a wanted feature that others don't? I don't use them so what is it?
-
I think your budget will be tight buying pro gear to tick all the boxes.
Also bear in mind pro gear generally comes with no manuals and will be complicated to setup.
Private reporting which isn't polled is useless if the signalling path fails.
Also I would always fit a contact on the entry door, and go wired wherever possible.
Best recommendation is to have some approved companies quote for a system.
Approved for what? Urn ?
-
Richochet kit or enforcer may suit you
-
Right then chaps
Just been for a survey and the client has 6 Italian whippets ranging from 6-16kg. She says they jump up onto window sills/worktops and they have free reign of the house when the humans are out. Any ideas on pet immune detectors or just tell her to lock them in a room when she goes out? Was thinking of contacts on all windows but she was thinking of having it policed so this wouldnt give me my confirmed alarm. Bit stumped at the moment so any help would be greatly appreciated
So basically forget all pirs except one or two , and shocks and contacts on every opener
nice job for you
Plus beams
-
What price would you consider cheap?And what's your budget
Alarm Latch & Pre Alarm Features
in !!..DIY Installers..!!
Posted
So buy a panel and bits put it on a bench and work on it until it is right, job done end of ?