al-yeti
-
Posts
9,132 -
Joined
-
Last visited
-
Days Won
116
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by al-yeti
-
-
No unlikely
If you can't ping the stuff either you setting something wrong
-
If you temporarily dmz the dvr does it work?
-
You on phone to China yet?
-
You better have something going on the side
-
No more batteries in detectors perhaps?
Adi will be happy? Or ......
-
No haha its these
test lamps
the inline resistor solved the problem.
the only other thing now is, its saying tel line fault press enter to continue when setting, even though its set to no in 50.engineers- 1paramaters 18stopset- 4.tel line fault - no
cant find any other settings for the tel line?
thanks for all your reply's
What did you correct on the door?
-
Is haft a word?
It is for him when he's feeling a bit violent
-
You probably havnt seen the problem correctly , what's the full log say when your setting
Are using an exit time?
-
Rubber seal inside , remove it and allows beading to be taken off depends on Windows though
-
Password I thought is via d connector and telnet
Old models though
-
D connector?
-
Seen one of those where the fitter put the beading on the outside... oh dear...
Some Windows are made like that, even wickes Windows
-
Talk talk are still nutts
-
We can't give that info out
But it seems when you disconnected your sensors you havnt connected them back correctly
As said "above" you have problems with zones 2-7 possibly
If you didn't mess with wiring in control panel that should be ok
But zone 1 is a door contact yes? So won't help you to wire the pirs
Each pir will have a negative and positive sometimes it's red and black sometimes it isn't , but if your saying in the panel all of them are connected to +'ve then you need to check what you did in your pits again
Why don't you load some pictures of each pir here ?
-
Bipper another one easy to get into the back , they punch a hole into door below handle takes them a few seconds
-
I see some couriers have notices saying cctv and audio being recorded for security reasons, all within there area of course , not sure if they do record though
-
I thought fire is unregulated meaning there's no real rules or law to stop anyone doing anything except you follow a British standard , after that if you want insurance to except it they will want a level of installation according to the bs standard and some say nsi or ssaib
Intruder you can connect what you want if no certs needed even councils around here give multi tenancy licenses based upon visual inspection a receipt to say its installed and your done
Or you will get done lol
And some star trek acico stuff!
Or did I read that wrong?
-
Better go through all the presets
-
So you can make it move? But not bring up menu???
-
Few I have done I always put a camera at back of garden looking at house as well as one pointing to rear you should consider that
-
Look at HIK vision instead used by many here and give them good results
-
Well app is free , but don't see many using the user software for dimensions
-
What desktop software?
-
Eh?
So no tamper switches work in sounder This way?
Talk Talk Router And Cctv Doesnt Work
in CCTV & Access Control
Posted
Sky routers are one of easiest
Work on internal ip first and try connecting there
I assume it works indoors?