Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,132
  • Joined

  • Last visited

  • Days Won

    116

Posts posted by al-yeti

  1. How did he not notice? Surely they use kitchens in your part of the country it cant be all fast food and takeaways

    He kept getting a trigger in his kitchen , was bit of a distance so I made an appointment but made him go through the log and pointed out the zone

    I said its showing alarm not tamper or fault , and asked him to see if he has rats lol ..... He found a thirsty sparrow

    Actually this was near Hertfordshire don't normally go up there , they only make chips up there I think

    you can on galaxy but agree it would be better with the right detector in the right place

    Two detectors? Overlap?

  2. QFA most domestic cctv jobs are not worth bothering with quoting.

    We give an estimate over the phone, which gets rid off the dreamers.

    Lol , around here £900 for 4cams , hik dvr 8way and those little Chinese domes that cost about 20quid

    I lose 80% of the quotes

  3. Set that pir as entry zone to pick up from stairs , providing keypad is before open plan area

    Or is keypad area picked as soon as you enter that small hall , idea would be walking down would trigger timer , if keypad isn't picked up by another pir then all good , or another keypad fitted upstairs which you deactivate from

  4. But it would also mean when part set there is no reminder that alarm is set if they deviate off into another room

    Can the zones act differently if part set ? Doc?

    Galaxy g2 / hkc you can tell the zones to behave differently in part set modes ie they become as you entry/exit

  5. Anyone ever fitted a camera where you have to deliberately set the camera just out of focus to compensate for the curvature of the hemisphere?

    #american dynamics

    Most complicited one we did was anpr for kenjestion charge , everything had to be focused clear weather at night and then checked again in other conditions

    But can't see how curviture will have an effect?????? Explain please

  6. Doc what version is that, I don't remember the dc boards being seperate

    Do you mean the pcb on top and transformer board on left behind it, they did go a bit black in plastic but still carried on working lol

    Metal version had more room though

  7. Bag of **** they are

    Saying that I've never had any issues on a home hub but for some reason audio challenge has stopped working on a site I set up at Christmas

    I've tried telnet to the audio port that's forwarded along with the others (udp summat or other) and its blocked. Wtf is that all about as it worked whilst commissioning ???

    Hub reset and someone not telling you?

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.