al-yeti
-
Posts
9,132 -
Joined
-
Last visited
-
Days Won
116
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by al-yeti
-
-
Not sure I understand the question
Possibly as above the relaybhas been programmed to do something under certain conditions or something , if that's possible check what the relay is set to do
-
We put Mr dd on callout still got a boat!?
-
On turn table aswell!
-
Perhaps have some kind of dual option , lol confirmed flood
-
It's cheap enough to try out I guess, personally I would rip the panel out at this stage
But like I said cheap enough to giv. It a go, experiment with door contact , you have one already?
-
Mct550?
But you may need to change panels aswell depends
-
Same here, so-called trade people asking how to connect a speaker to a Gal etc...
Yeah but interesting when they don't know where other leg goes
-
I think minimum opt for a dialler or monitoring if you can afford it
Or hkc panel with on-board options there's a few northerners who install it
-
Ok depending on how it's setup it's quite expensive via the tap service, granted its only per call or sms which I think via open tap is 50p per sms
If they using older o2 or vodaphone centre numbers they are not always reliable
I would have thought in that price there was at least a dialler of sorts or and stand alone gsm unit
Is that the full detailed quote as it doesn't mention monitoring, I missed it speed reading maybe
-
What monitoring are you getting?
-
Yes. putting it in, keeping stock and not as dirty. When it come to using your head, they can be mentally taxing as each other.
Have to disagree about mentally taxing , electrical more Labour intensive , alarms if you knew what some these guys here do with linking systems together and so on you will soon think it's a bit more techinal than you think
Unless you stick to basic systems like me, and don't want the xtra headache
-
I welcome the debate with you. Every part of you job is easier and cheaper. But i'm referring to say police or call centre responce systems. Plus have a company in place 24/7 for problems. Not a tight **** who just wants cheapest alarm he can. As i get older i don't think i could be a electrician in my 50's. Alot of electricians do move over to your side and don't come back. They all told me it has it's ups and downs, but it's a lot easier life.
How is alarm fitting easier than electrical? You just mean the Labour side yes?
-
Is this supposed to be in trade?
-
But I don't see how any of this will be good for anpr?
Or was it just for visiually trying to read it?
-
Galaxy is best wired panel imo , but wireless has its quirks
-
Get a hkc installed built in dialler will give you locations good monitoring options
-
I Duno Vista always worked for me, bus version , xp pro was ok, win7 update crazy lol
-
I still on Vista will only upgrade to this because (here I go) hkc software won't work with Vista , does it work with 10?
-
This was my first time posting to this forum because I sought some assistance from what I thought was a group of professionals in a similar industry. The petulant and childish responses I have witnessed so far are to be honest disturbing! Is the security industry in the UK really that infantile? Is this the expected maturity of a life protection system engineer in your community? I shudder at the thought. I sought some 'expert' advice on my first installation when the manufacturer's technical support team was not available. Wonderful work by the Global Moderator I might add! Seems to me the UK market could do with some professionalism - might just make a trip over!
What about the answers to questions to help you? or did you miss them?
-
Either way it perhaps programmed wrong or wired up wrong
-
On that panel doesn't it beep in exit either way?
-
Feed most dogs they quiet
-
Ok don't destroy bell
Fill it foam first
-
Maybe there getting it cheap , no point with 1way , diy perhaps
Risco Prosys 40 Will Not Except Gmc Or Installer Code
in !!..DIY Installers..!!
Posted
Unlikely here, why don't you ask the installer?