al-yeti

You will also have to think about faults , with a fault he can't open the door at all, so you will still need some kind of override feature ,with the obvious secondary door access or manual shutter pull and so on Basically possible to do with other problems to go with it

He is lol

You need to decide on pir , good quads or dualtec and more or less anywhere no facing to many heat sources windows etc Or something like that

Off On On Off Leave as default to start with

Must be to do with firmware not being able to cope , galaxy had that issue to on few minor things though

Couldn't resist forum has done me lol

So you checked switches ? Ebay purchase?

Member ts? Or something

Thought you lot were?

Competent diyers probably could struggle through it like texecom panels but will get stuck when you need to buy anything for it, pyronix readily available , visonic even more so since adt bought them and plenty of stock floating about don't you think? So easy for diyer

No forgot , maybe pyronix for diy or visonic Why is any panel not diy?

Texecom because most won't be able to programme it lol Other to diyers in it hardcore Recommend hkc myself......

Engineer reset?

It's fun when hanging off the wall to do anything would be nice to have it hinged perhaps Few I have seen all sound together never separated as you say

So had nothing to do with what you originally said

You lot that rough?

Model of alarm ? And pir ? Do a few posts so you can upload pictures But could be you need master or engineer reset, or you dropped a spring , or tamper broken etc

Doh I never noticed but then never needed to use it on them either , simple house bashing

Tough book is great, throw in , throw something on top keeps going, used one though , new quite expensive

Link? G2?

He means get an alarm engineer to help, (approved lol) as you say occupational hazard , but sometimes leads to problems you can't normally solve So if it's an engineer reset then you are stuck , it may require code reset reprogramme and so on Thing is if you have it fixed then you should also charge the customer for its reset , as you only want someone to clear tamper and put it back how it was , customer might get cheeky and say we will use it then As above its an expander issue so you havnt worked it out correctly , opening more covers on an old systay make matters worse

Is it faulty? Looks handy kit

Must be G , he been on fire long time and can't rember galaxy

Exit engineer and use default manager code , rules say I can't tell you that but isn't hard to find

Or in 51 look for reset manager code then use default manager code to set users up