MrHappy

nick 'em from every job....

I look forward to 2023 & your next amazing post....

buy 1 then flog it on ebay.... I expect you to get most of your £ back ?

connect meter to pos of battery & pos battery lead turn off mains power (normal current reading) set alarm, trigger alarm (alarm current reading) apply mains remove meter plug battery back on

Find out where Tommy Walsh lives & go & piss though his letter box..... Or just buy the correct batteries for the product ?

personally I've been pulling stuff largely at my cost just to get UDL often the cost of getting it working outstrips the purchase price by quite a lot, I'll also bin controls at my cost if it suits me single path, self contained signalling fills my heart with joy G2,G3,G4 Dual path IP mean I have the subscriber ISP issues

Its either the Equaliser or the A-Team ? TBH I've had a drink & are getting a bit mixed up...

Really ? What other 30yr old constantly on electronic kit in your house have you still got ? The sensors been dropped when the coving was added... Many people only buy 8 core.... saves having lots of different reels & wiring in 6 when 7 pairs are needed.... you have my my deepest sympathy... You need nothing better than a DVM - Voltage, Current, Resistance. voilà every measurement need for an alarm circuit Throw it away & buy something less shite, If I wanted to bodge your knacked old alarm to together- Adjust stetsons to correct angle, check for indians (not you Al ? ) Assume tamper is a negtive loop, Assume 12hr circuits are positive loops At the controls place + voltage into one leg of an unused unlinked zone, if not closed try the other leg Should it not work or the controls start smoking see underlined text or try - ?

after it its been kicked to death...

they do lawn signs- bit of double sided tape & bob's your uncle...

https://en-uk.ring.com/products/alarm-security-5-piece-kit looks utter tat....

PTS is the completion of the setting process. Present tag or enter code, system starts to set, you close the entrance door (lock it or whatever) press the PTS & the exit mode stops & the system should be set pressing the button (unless its programmed to chime) does nowt unless the system in exit mode

He's got a clever bit of software which pulls the programming out (wrote in python iirc) for Texecom's ? However you can't lock Euro's....

since @datadiffusion is absent- https://www.ebay.co.uk/itm/Pyronix-Euro-46-NVM-Unlocking-Service/333468528617?hash=item4da445efe9:g:M00AAOSwHLFeE3Iw

Its been on the floor in box for a few weeks, but today I installed a Lexmark B2338dw at work its appear to really fast mono printer when compared to the borther/dell macine it replaces

rip it out & stamp on it I also assume SRN01 to be the external sounder ?

looking at your work.... I would recommend a wire free alarm on your next job. I assume very low,

would it not been easier to make a few BFO holes in the coving shove the wire to the next BFO in the coving, rather than butcher the wall ? 1/2 a bag should sort your work- but I understand its still hard to get hold of?

Looking at the picture, he must have a very understanding wife or lives alone....

lovely, how many alarm cables are you fitting ?

wilko / b&m

there's gonna be very little face to face training, all the fire modules are gonna be class room based TSI regular posters are embittered trade professionals & school kids fishing alarms out of skips If you want to work in the industry, apply for job somewhere diy skills & basic electronic & electrical will paper qualifications are great to have, but not the same as practical knowledge

its unlikely any coarses will take place due to covid ? are you an adult ?

I once did a job in Ardrossan..... I believe the foreign office, issue the same advice to travelers as they do for mogadishu, apart from the sun screen ?

5 cups of cold piss ?