John Goodfellow Posted October 15, 2022 Share Posted October 15, 2022 Hi guys I'm having my house pointed and have 2 active wireless bell boxes to remove, the engineer says disconnect the battery but once they are unscrewed from the wall the alarm will go off so I have to lay them on their back and put a decent weight on top as they have a pressure device (anti) tamper) that goes against the wall then I have to put in my 4 digit code and press NO so that's OK for the removal does anyone know how to refit the boxes I suppose it's just fasten them back to the wall and they will start to go off so once secure put in your 4 digit code maybe with YES at the end, me email is REMOVED if anyone can advise further, thanks Link to comment https://www.thesecurityinstaller.co.uk/community/topic/45351-disable-siren-bell-box/ Share on other sites More sharing options...
MrHappy Posted October 15, 2022 Share Posted October 15, 2022 Pay man to remove & programm off system,leaving item disconnected Pay man to return & refit ? Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/45351-disable-siren-bell-box/#findComment-516636 Share on other sites More sharing options...
sixwheeledbeast Posted October 15, 2022 Share Posted October 15, 2022 Do what you did in reverse and hope it works. Putting a weight on the back tamper is bound to cause issues. If you have to DIY it that way you should mount them to a scrap sheet of timber back as the were. Really best option is above, remove, de-commision, have your work done, reinstall, re-commision. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/45351-disable-siren-bell-box/#findComment-516637 Share on other sites More sharing options...
al-yeti Posted October 15, 2022 Share Posted October 15, 2022 10 hours ago, John Goodfellow said: Hi guys I'm having my house pointed and have 2 active wireless bell boxes to remove, the engineer says disconnect the battery but once they are unscrewed from the wall the alarm will go off so I have to lay them on their back and put a decent weight on top as they have a pressure device (anti) tamper) that goes against the wall then I have to put in my 4 digit code and press NO so that's OK for the removal does anyone know how to refit the boxes I suppose it's just fasten them back to the wall and they will start to go off so once secure put in your 4 digit code maybe with YES at the end, me email is anyone can advise further, thanks As above pay alarm man for two visits although the refit is where you really need him provided you don't mess something up 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/45351-disable-siren-bell-box/#findComment-516638 Share on other sites More sharing options...
PeterJames Posted October 17, 2022 Share Posted October 17, 2022 Removing two external sounders diy what could possibly go wrong..... Take mr H's advice, or have the pointing done around them if you really cant afford an engineer. It would just save you falling out with your neighbours. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/45351-disable-siren-bell-box/#findComment-516660 Share on other sites More sharing options...
Imnotshankled Posted October 18, 2022 Share Posted October 18, 2022 2 hours ago, PeterJames said: Removing two external sounders diy what could possibly go wrong..... Take mr H's advice, or have the pointing done around them if you really cant afford an engineer. It would just save you falling out with your neighbours. Well then again there's the faithful hammer if all goes wrong Link to comment https://www.thesecurityinstaller.co.uk/community/topic/45351-disable-siren-bell-box/#findComment-516661 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now