PSE Posted February 23, 2017 Share Posted February 23, 2017 23 hours ago, datadiffusion said: due to mesh commissioning, don't enrol until you're on site with devices! I'm curious why you think it's a problem. Every ricochet system I've ever installed is programmed, all devices learned and tested up to 72 hoursI generally on a plug top and a 7ah whilst under test. I've never defaulted a system once all learned, it's pointless waste of time. I always leave batteries in everything during transit to site, even the Panel battery. As long as you follow the correct procedure on site with lids off everything and give time for a secure stable mesh to build, verify mesh integrity on ricochet monitor you're all good. That's the beauty of this kit as you know, It will always adapt to the environment and create its own best route back to the Panel. Not sure on what everyone else's own procedures are... But there's no way I would turn up to a full ricochet install with nothing pre programmed and function tested in advance. Be be interested in others thoughts on this. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 23, 2017 Share Posted February 23, 2017 not texe but always program on site. I test them and learn em but no not every time Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
AdrianMealing Posted February 23, 2017 Share Posted February 23, 2017 Quote As long as you follow the correct procedure on site with lids off everything and give time for a secure stable mesh to build, verify mesh integrity on ricochet monitor you're all good. That's the beauty of this kit as you know, It will always adapt to the environment and create its own best route back to the Panel. This is the key to it Quote amealing@texe.com Head of Industry Affairs Visit Our Website Texecom Link to comment Share on other sites More sharing options...
al-yeti Posted February 23, 2017 Share Posted February 23, 2017 Hkc just to easy , all on site after first few trials, software very quick and easy to follow to make quick adjustments Quote Link to comment Share on other sites More sharing options...
matt-289 Posted February 27, 2017 Author Share Posted February 27, 2017 Thanks for your help everyone Got the system up and running today with no faults Took a while to get my head around the setting up procedure and having to change the sensor settings for entry/exit, guard etc.... but seem to have got there in the end So now she wants me to get her an internet sounder ( not a speaker as in my previous post ) Could somebody point me in the in the right direction for what I need to purchase, and also the correct way to connect one of these into the panel, I've taken a cable from the panel to the point where the speaker is going already Thanks very much Matt Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 27, 2017 Share Posted February 27, 2017 3 hours ago, matt-289 said: So now she wants me to get her an internet sounder ( not a speaker as in my previous post ) Use the speaker, it's what it's for. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Prodigious Posted March 8, 2017 Share Posted March 8, 2017 (edited) On 22/02/2017 at 4:58 PM, datadiffusion said: Ok, that's only got 4 wired zones (better than none!) although you can use an expander. Or six if you consider the 2 zones on the RKP as well On 22/02/2017 at 4:58 PM, datadiffusion said: On 22/02/2017 at 4:58 PM, datadiffusion said: On 22/02/2017 at 4:58 PM, datadiffusion said: Edited March 8, 2017 by Prodigious Quote Thrones Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.