Hi,

 

I need help wiring a Novagard 2 bell box to an ADE Accenta G3 alarm panel. The sounder only goes for two seconds on power up, before stopping. The LEDs flash normally, however, there is a constant tamper on the panel too, is this some sort of test mode that the bell box is in? Am I missing something? I am guessing it isn't meant to do this. If it is a test mode, how do I get out of it? I tried powering it up just with the hold off connected to a 12v power supply, and the same thing happened, so it isn't the panel. I also tried using the negative trigger, on the 12v power supply, and the exact same thin happened. I hope I don't sound too dumb for asking this, if it is a really obvious fix! Any help is much appreciated, thanks!  

 

Gabriel

you have checked the obvious neg return?

Or read instructions?

 

As any test mode would be explained in there

People in glass houses... 

...shouldn't always take their clothes off during the day

Not in this weather...

3 hours ago, norman said:

People in glass houses... 

 

...should forget security and stick to Grand f**ing Designs

Edited January 27, 20179 yr by datadiffusion
For the children offended by naughty words

Haha

Hi, yeah, I have read instructions, and they don't mention anything about it only going off for 2 seconds before stopping. I have tested both returns tamper, and sounder trigger; all seems to be fine. Anyone else had this problem? 

Quote

 

don't know the bell but does it have a test timer?

also have you metered the bell trigger?