SoupDragon Posted September 29, 2012 Author Share Posted September 29, 2012 Confirm the rear tamper mechanism is being pressed as the backplate is pushed to the wall. If not, a plastic pillar is provided to extend the rear tamper lug to the wall surface. This can be cut as necessary (found near the front back Tamper switch) The lid/back tamper isn't actually being depressed even on a flat surface (I just have it on my workbench atm in the shed). There are 3 plastic pillars (2 small ones and one large) I assume I would use the larger one and cut? They don't snap off the backplate do they? Link to comment Share on other sites More sharing options...
fozzies Posted September 30, 2012 Share Posted September 30, 2012 Some sabs require u to bend the metal attatched to the tamper microswitch to suit the surface you are attatching it to Link to comment Share on other sites More sharing options...
james.wilson Posted September 30, 2012 Share Posted September 30, 2012 You have 2 light bars for the leds and a tamper extension. Use the tamper one and cut it down to suit. You have 2 light bars for the leds and a tamper extension. Use the tamper one and cut it down to suit. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
mervzila Posted October 25, 2013 Share Posted October 25, 2013 Nothing complicated about EOL wiring. Texecom anybody can easily program with Wintex. Premiers, Galaxys etc are in a different league to a G4 you can't compare them. Is wintex the texecom programming software ? Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted October 25, 2013 Share Posted October 25, 2013 Is wintex the texecom programming software ? Â Yes Link to comment Share on other sites More sharing options...
Rulland Posted October 25, 2013 Share Posted October 25, 2013 Am I the only one wondering just what 'trade' entails these days?. Link to comment Share on other sites More sharing options...
james.wilson Posted October 25, 2013 Share Posted October 25, 2013 trade = being a professional in electronic security / fire from a tsi point of view securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
matthew.brough Posted October 25, 2013 Share Posted October 25, 2013 trade = being a professional in electronic security / fire from a tsi point of view I think your criteria is stricter than the industry's . . . www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
james.wilson Posted October 25, 2013 Share Posted October 25, 2013 what tsi actually checks? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
matthew.brough Posted October 25, 2013 Share Posted October 25, 2013 what tsi actually checks? Does my aceenginner@hotmail.co.uk not get me trade status? www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.