Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,724

  • Joined

  • Last visited

  • Days Won

    290

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    You definetly connected it correctly?
  2. james.wilson
    Ni cads can take a lot of abuse when I used to race model cars you could put more into them than so called fast charging today. Used to thermal charge at a stupid temp limit. Used to put the thermocouple on the pack. Ni mh was a good compromise of capacity etc but I'd go nicad on a bell if I wanted to design one
  3. james.wilson
    It wasn't lithium based back then
  4. james.wilson
    Piezo needs high voltage old school mylar cone speakers need less but require more power. I prefered the lower freq as it gives more range but looks worse on spec sheets at 1m
  5. james.wilson
    I rate the multi box sia uses them but only the g3 one
  6. james.wilson
    No one really cares about a custom bell and the client certainly doesnt
  7. james.wilson
    As 6 it's the hardest place for a component. But no reason for it not to be microprocessor based, our cars are for instance.
  8. james.wilson
    As you have I'm sure someone will be in touch
  9. james.wilson
    I don't use the gear but iirc that panel is a really basic premier. As the keypad that's been added is a prox one I think you will need to upgrade the panel which isn't a bad idea anyway
  10. james.wilson
    Yes but becareful of the predrilled hole size of the dclip. Also can use plclips without predrilled holes when hidden. I was also meaning for other cable types Most of the clips are plastic however I think the 800 replaced the above
  11. james.wilson
    Agreed on the d line. Also use a spit nailer for speed with pirelli clips
  12. james.wilson
    What does the socket look like?
  13. james.wilson
    Hello and welcome I'd go with the notification option re 2 sabs but could be remotely powered or no internal
  14. james.wilson
    Welcome
  15. james.wilson
    Thanks I was curious as I assumed wireless. Wonder how this will go with newer systems supported by a maint contract?
  16. james.wilson
    The leds not flashing says to me Sab tamper not closed
  17. james.wilson
    What will you replace it with?
  18. james.wilson
    I'd say your issue isn't Paxton related then. Is your relay stable from the alarm I'm assuming it isnt
  19. james.wilson
    I belive if you complain to the council they change something. I'd love to know what they do.
  20. james.wilson
    Don't know the panel you may be able to program them as double pole
  21. james.wilson
    Did you link out with cable or the relevant resistor?
  22. james.wilson
    im wondering if you have a bad connection on the plug/pcb/relay on the connection link it at the Paxton to see if the messages stop and work back from there to identify where its coming from
  23. james.wilson
    It looks like it's continually arming etc. What's the relay state and what if you link the input
  24. james.wilson
    Don't say that I'm an rbs shareholder
  25. james.wilson
    No ive finally replaced my 950xl im looking at apps I have wanted to use magicplan for a while but didnt have a device. got me wondering what apps the rest of us are using?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept