al-yeti

I can't see how changing from final door to timed would make a difference If it's intermittent I would change the door contact When you set via the app , you unsetting from keypad when you enter ?

And have idea to switch to galaxy 60 for installs yes? Or dimension?

So your going to try a dimension ? Instead of galaxy 60 for your installs ? Where you buying the galaxy 60 Thought you signed up with orisec? And used euro mini?

Set b and see if it arms example downstairs , as it may already be done These systems like the 9651 are often pushed and pushed by diyer until they lose all the programming and eventually require and engineer anyway The system probably needs servicing and local engineer should be able to do it easily But if an alarm is important get something more up-to-date or scrap it and get a dog

Lol ok thought you meant on installs, you mean for shed?

Illegal extension ? Told you your Asian

Switch to galaxy from what? And to which galaxy?

Just stick to the 8.1 and Peter back it up on disc

You need engineer access to switch off the coms , there's a few trade DIY visonic experts here , they may comment soon

You mean it's alerting you? Or on zone status when checking before setting? Don't about this panel ,but the latter point galaxy also shows tamper when spare but will set as normal

Depends on there mood and what you done , police aren't around much anyway,but they do check docs thoroughly on insurance , plenty of traps setup lol

You got any experience with particular models cheap and cheerful , need to experiment first Like this ? https://www.ebay.co.uk/itm/153913244331

Uber alarm services?

Good job Although 20years? Hahaha

Wouldn't pass a producer these days

But you didn't install it so probably done by someone else

Was sticking with polycom lol since by rebadge them aswell lol on IP But ok the converters are cheap enough will give it a go Stick to stalking?

Yes it is

And that will just hop on to IP service?

Eaton scantronic I know your reading this , helicopter above forum You missed the boat , need all devices two way , I might have switched to ion aswell Only reason they keep app platform free is because they probably collapse by now if they didn't

But you are DIY ? DIY prices , DIY installs ?

Actually that might be better but you could also cut the reed up top and use the legs to solder to rather than messing the board up Agreed about rf

It's centre using PA system they switching to bt voice express cloud , they have a phone analogue already connects to PA system one of those polycom things as they do conference calling and put audio through to pa The polcom is available IP But I wanted to see how I can some of there analogue devices into the system if possible

Anyone use these VoIP convertors? Take an analogue phone connect to the box like a Cisco 188 or whatever it is and use it as an IP phone ? If so does it just connect into your existing cloud or sip connections as another device?

This is worth the try Providing you know how to solder and not butcher