Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,121

  • Joined

  • Last visited

  • Days Won

    116

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    You assumed zone 4 is patio doors by searching online A zone could be any device in any zone Ascertain how many sensors you have trigger them one at a time on walk test and tick off each one , you may find magnetic sensors on doors in the frames or on the surface , to try and narrow down what and where your looking for it
  2. al-yeti
    Yeah foscam is cheap and cheerful sold expensive by some bashers it really is junk
  3. al-yeti
    There's many https://www.gsm-antennas.co.uk/cable-extensions-ethernet-power-leads-sma/sma-extension-cable-range-low-loss.html?limit=all
  4. al-yeti
    Yeah ok lol
  5. al-yeti
    Your right plenty spares on eBay , especially keypads, so carry on like contracts, never upgrade and never move with the times
  6. al-yeti
    Apart from that ignore engineer hold you could connect it if you want at the bell side and leave it disconnected at panel end
  7. al-yeti
    Might not be what your looking for but Why are you not scrapping the panel aswell?
  8. al-yeti
    Got no idea , I was just commenting on another comment , Reality check you have all the answers above so need to make choices choices , always means spending money lol
  9. al-yeti
    Probably because com2400 primary function isn't being a speech dialler
  10. al-yeti
    Picture? I haven't seen that one Mr galaxy will may some thing soon?
  11. al-yeti
    I meant the device not the aerial , some devices work off a buss like the webway and so , and you can mount it away from the panel but these cards you can't
  12. al-yeti
    Yes
  13. al-yeti
    Ah I meant dial capture , android is as bad as me
  14. al-yeti
    So installers hands over phone to end user and gets it free either way?
  15. al-yeti
    It's a shame allot of these products can't be mounted further away as you can't extend the data connection Maybe everyone has to switch back to dial capture and all is well
  16. al-yeti
    Hmmmm not for diy I reckon
  17. al-yeti
    What pyronix pet? I linked to the universal device so he could put shocks on Windows proper man
  18. al-yeti
    Cost of it is worth a try
  19. al-yeti
    I don't have experience with blue line Pete where you at man https://www.pyronix.co.uk/products-and-solutions/ur2-we Worth doing for a diyer
  20. al-yeti
    You think hikvision will start charging some time soon? Would be good if they did lol Would you start fitting the agility when they start having to pay?
  21. al-yeti
    On a spare zone yes, only issue will be it will act as a single zone with multiple detectors
  22. al-yeti
    Or maybe in your case the pyronix wireless add-on would work....
  23. al-yeti
    Blue line is probably what the dudes will recommend but can you install any shocks on the windows or does dog headbutt door? Why not just omit ,on a newer panel this would all be easier to do , reality you need to scrap that panel even if you think it's good
  24. al-yeti
    Dunno about auto reset to be honest can't remember , but you can change the fail set time so if you have a Pir on exit this will stop any failset message and reset required on entry I think
  25. al-yeti
    I am guessing your triggering all the sensors , then setting and then Immediately trying to trigger them Set panel , go out wait 3/4mins and then trigger them , go out meaning out of Pir area and wait
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept