al-yeti

It's actually Renault-nissan for the mercs I think, on entry level cars , higher supposed to still have the Merc engine

Repeaters cost as much as the panel in some cases I think

25devices, plus 5call points , Mx addressable panel , remote panel (those small things that cost arm am leg) Not including cabling cost £4k subbed out with cert liability blah blah blah

16 on its merry way out I thought

Dispatch swb

No Trick I meant forget this model , if you really like scantronic move to the ion but not the ion16....

Probably faulty panel, Replace it , it's cheap anyway but I would pick something more upto date while your in the mood to spend

You want him to swap a veritas for a accenta???

Pointless switching to wireless when you have wired Even more pointless switching to risky

Are they that busy with DIY? Hkc I guess smaller odd time they have been busy you get put on a call back list. And they always call

Looks like you been in there already, just like my installs excellent

Actually the resister thing I was thinking of something else , it suggests about speaker feedback needing the resistor and some other reason for tones

The board comes with a ribbon cable to attach to the main PCB, the ioboard clips in on right I think (been a while) D1&2 are your +- volts, speaker isn't used if your not using a speaker , the bell output can be used but all depends on current draw of the alert sounder Maybe someone else can comment Resistor is normal there because the speaker and bell being used same time Any reason it must be these Sounders? The zone on the Io board and be programmed as the tamper

Disconnect mains and battery Get ladder with ear muffs and disconnect bell?

How many devices? Ignore Peter he's a veritas supporter lol, Texecom Pyronix euro Honeywell flex 20 or is it 50 Seeing as you have wired sensors in place

Self install? Or Engineer ? Whatever you do , don't put another veritas in , good panel in its own way but pointless if you want to upgrade and move with the times

Be serious Search the internet as Mr G is waiting to see what you come up with

Lol You ever worked on bt network?

Thought bt providing pstn through the fibre box Total blag of a title , "The decent alarm panel you installed like ..... Will work on another path no problem by a simple upgrade " Years away from dropping pstn

So these have a little screw holding board in I think, you could take pic, remove 12v tape up and in turn each one tape up separately Then take board out only and swap over with other Some might say upgrade the pirs anyway and scrap it ......

What pirs are they, picture? If it's possible you could remove the power tape them up and then swap boards over etc

Yes , you don't have to use engineer hold off though , be careful with the power connections tape them to be safe and take a picture of how it was wired

Remember the film "Falling Down"

You will be assimilated of course