al-yeti
-
Posts
9,150 -
Joined
-
Last visited
-
Days Won
117
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by al-yeti
-
-
4 hours ago, paulm1986 said:
I got "checking Bus" msg suddenly when everything was working as it should before and the date went to 1/1/2005. all the codes went back to default codes and the internal sounde went off every 5 minutes. Any ideas? do i need to reprogramme the sys. or is ther another fault. why has it gone like this. sys was installed in 2015
Paul
Needs new panel , starting to see this often in the 9651 and it will happen again
-
27 minutes ago, Jim Willsher said:
I have. I’ve got it working, it was a schoolboy error on my part. For some reason I got it into my bed that EE was the keypad so I wired it into there. Of course I should have wired it into data and clk. I’m embarrassed to even write that!
Nah no embarrassement
Good job
-
1 hour ago, Jim Willsher said:
HiI’ve finally been able to wire this up today (new extension was delayed). But I can’t get it to work. They keypad buttons are illuminated and they beep when pressed, however none of the LEDs on the left are illuminated. Also, entering my user code does nothing, apart from the key beeps.
Can anyone suggest what I have missed? I didn’t understand the reboot comment above so I have not done anything besides the wiring.
Original keypad was address zero so I have set this to address one.
Many thanks.
Jim
Reboot meaning disconnect mains and battery , reconnect mains and the battery in this case
-
8 hours ago, PeterJames said:
Agility is one way wireless, surely two way coms would be required for a panel to tell a bell its in engineer. In the same way it would tell detectors its armed. Im not saying your wrong, but why would manufacturers make a wireless system that disables the bell in engineers and not make a hard wired one that does the same. After all you only need 5 of a 6 core cable to wire an sas so you have a spare if you only use 6 core. Not that I would use it though its sound too much of a risk.
Very few would do it though, too much faff and another thing that could go wrong, with serious consequences, nobody wants a failed to operate on their hands.
Ok but it's possible
I would always wire it in but leave it dissed at panel for my own use , but then don't use those bells much anymore , shame it's not a standard feature on all bells
-
3 hours ago, sixwheeledbeast said:
Generally this is correct you can't open a siren without triggering it, but it will all depend on the system and it's condition tho.
Faulty, poorly installed or wireless may react different.
Engineers mode would disable internal warning devices on tamper, however wired bells (SAB) are self activating, it's in the name.
Galaxy? Or similar using delta with tamper disable connection to an output when in engineers mode , sure it will disable the tamper ......
-
1 hour ago, PeterJames said:
Along with the light bulbs and switch's
Lol some.people do that , not witches tho but will remove the nice stuff replace with cheap white read the small print
-
50 minutes ago, Imnotshankled said:
The DIY tat is ****
For the alarm recommend texecom ricochet kit with a smartcom
Cctv I recommend qvis for Cctv
But smartcon isn't easy for DIY either right?
-
46 minutes ago, MrHappy said:
I was toying with ringing his office for advice on a matter & or a fight!
He won't fight you , he will just take your to McDonald's ....
-
31 minutes ago, Imnotshankled said:
Found him
Lol
Ok you finally got me , this is your best quote so far in this forum
Chris no offence , don't come looking me cos we are cool right ? (I better keep bat next to my pillow)
-
1
-
1
-
-
On 04/09/2022 at 16:48, MrHappy said:
Loads have chucked it but for whatever reason, not passed it on?
Data's probably wasn't worth much beyond a web address, telephone no & a list of names ?
Not even the names sell these days, telephone number web address ? Maybe still small change in grand scheme of things
On 04/09/2022 at 16:47, PeterJames said:Ive been fitting flushed in led light strips in the master bedroom ensuite
You want to take over the coast
Need another thread where is Chris?
Chris are you out there ? Have you fixed that dodgy cabling yet?
-
10 hours ago, Imnotshankled said:
Is it just me or has there been a decrease in quality on channel led emergency lights I recently had a few dead on a site during a test
Batteries or the lights
-
57 minutes ago, MrHappy said:
largely ?
Few guys like this , only maintain locally and doing other things
Pete far to cheap down the coast, messed up the whole market
-
52 minutes ago, MrHappy said:
prison ?
You got a contract down there you need fixed ?
-
5 hours ago, MrHappy said:
Not been on in 2 years
As I understand it has a proper full time job & the alarms was more a hobby co. ?
He was part time ambulance man part time alarms
But like most of us one band kinda thing we ha e more than one thing going on
But where is he ?
-
2 hours ago, Imnotshankled said:
Good thing I started to fit qvis
Lol
-
44 minutes ago, james.wilson said:
I dont know id assume we cant get them. probably best to raise a ticket with admin if your after one, im not in the office till next week sorry
Was for op , I got rid of all my galaxy now , although I kept one spi key minor bits
-
5 hours ago, JonnyB1971 said:
Wow, thanks for that. You found cheaper stuff than I did, well done.
Btw I didn't realise its showing not available, but for the sake of spi key just buy any key for dimension range they all the same , you just won't use the firmware that might come with it
On 21/08/2022 at 08:26, james.wilson said:i assume its the remote password in the panel, not the rss program password
How comes spi key not showing available
-
On 21/08/2022 at 21:36, JonnyB1971 said:
I'll have another sesrch for it. Yar, company won't pay for it...if I were self employed I'd just buy it I guess.
The latter just an extra tool , but you need all this gear if your going to continue
Although I can't see even dimension with a future , powerful commercial panel
-
1 hour ago, JonnyB1971 said:
Hi,
It told me invalid password or something of the sort.
Er..no...I don't get paid enough to just go and buy that kind gear unfortunately.
It's cheap and cheerful tho........ So company doesn't supply you with anything ? Or I guess self employed don't tool up
eBay then sometimes although just as cheap to buy it with updated firmware
-
20 hours ago, JonnyB1971 said:
Hi,
It's a 520. Our Engineer code is in, and we know the MGR code. Unsure about user codes, thats another reason I'd like RSS access.
I didn't do the panel take over, I was there as a revisit to service it...I just like to get backups when I can...nobody else in our company uses the RSS software or can be bothered...I just like to because I can, well usually can. Haha
So what's rss telling you when you hit enter?
And by now I assume you have bought spi key right ?
-
13 hours ago, JonnyB1971 said:
SMH...*rolls eyes*
I have connected to several Galaxys, I am aware that you ordinarily just use the blank password...it didn't work.
Thanks for your input though, very helpful. (I wish there was some form of punctuation to alert the reader of sarcasm).
Unfortunately I don't have the rs232 module or a dumpbox, or SPI key so can't go down that route either, which is why I was here asking a question. Didn't really fancy defaulting the panel just to take a backup...kinda defeats the object eh. But with the log showing a rogue/unauthorized remote access I figured the issue needs to be addressed.
So what panel is it exactly, you got picture of label please?
And your also not clear what codes you possess? User only ? Engineer? Master?
-
43 minutes ago, JonnyB1971 said:
Hi,
Ex telecoms engineer, been playing the Electronic Security game for 2½ years now. Managed to bag myself a copy of HONEYWELL GALAXY RSS software and today encountered an ex ADT site. We took over the alarm 18 months ago, but I'd never been to this site until today. I thought I'd take a backup...turns out there's a password stopping me connecting. Worryingly, after I went through the event log and saw, several weeks ago, a remote rss session doing a database save, I can only assume it was ADT accessing a site that they now no longer maintain. Is there anyway I can bypass/remove/change this password does anybody know? Thanks
Unlikely has password tho
Didn't you just hit enter when it asked for password , or you got scared?
-
1 hour ago, Imnotshankled said:
What is the level below chimp?
Me the blagger, only space for one tho
-
1
-
-
14 hours ago, Imnotshankled said:
I hate how those baboons gives us gorilla's a bad reputation
Your a chimp, Monkee status years away, and gorilla is few like H
14 hours ago, Imnotshankled said:I thought customer never owned any of the equipment, some have been charged for not returning it
Scantronic 9651 'checking Bus' Message On Exiting Engineering Mode
in !!..DIY Installers..!!
Posted
In your case DIY? Ion40 it's not the best though