MrHappy

yeah he's probably hard up for work on 23rd of December & wants to tap up some random muppet who's probably hundreds of miles away for a new bellbox...

it depends on the product, you never stated which controls it was some fully default by a jumper, some need chips pulling out ect..

worked on a plaggy one, a mini, 3 metal ones... all tat Imo dunno, I dont think an ajax type of thing is the way forward

with its top off-

I'd rip it out & stamp on it to ensure its dead.... If you need to replace with same thing its probably cheaper as a kit /

I doubt there enough profit I a single panel to pay for 15 minutes of support ?

Somewhere on my phone I have pic of YEB panel, fitted at skirting board height in former filling station.... selling nuclear fallout shelter for the soon to kick off ww3 ?

nah its still DIY toot....

have you turned the pot up ?

lets have look at the information on your link dated Dec 2020 - If you run an Alarm Receiving Centre the rozzers have mostly automated their control rooms (ECHO) & to be on their platform you'll need a "Cyber Essentials Cert" which is nothing to do with NSI (or SSAIB) If you don't have your own ARC but use an accredited 3rd party like almost all of the modest sized alarm co's there's no need to bother with "Cyber Essentials" as it not essential to have 😉 PS all business & personal passwords are B@nanaman1983 & I've never been hacked....

One of those auditors was in town the other week,, he went to load of places the local where quite unhappy about being filmed...

Unlike my only fans a/c this one's free- VID_20241108_182950361.mp4

An induced AC reading of 66.6Vac is one to worry about....

poorly... 🙂

Exorcizo te, creatura salis, per Deum vivum, per Deum verum, per Deum sanctum, per Deum

demonic possession, contact your local priest ? Or the sensitivity on the keypad it too high, calibrate / adjust or replace ??

power it down fully & then see if the function comes back other wise live without or replace it

battery fail 100 ?

Last time I logged onto SW I can now see pricing, which quite a bit better than I assume it would be...

Does your Irish tat have a radio receiver built in ? Then you add gsm / wifi card for comms ?

You didn't even angle grind anything ?

did you check the fridge ?

sounds like a refrigerator problem... You probably have a hellhound called Zuul who is the Gatekeeper of Gozer living in some sort of parallel dimension within the fridge ?

OP - find a a proper alarm co which uses proper gear 🙂 (that's at least find of the posters clicking the like button)

does the irish tat do serial devices off normal alarm cable ?