Introduce Yourself

Howdy, names Tim I live in Brussels, Belgium. Started out as fire and intruder alarm installer about six years in the business now. Recently beeing part time self employed as installer of intruder alarm systems CCTV fire and CO detection. Comming here to share knowledge

Rummer has it that john moore has been taken over by //.Large National Installer.//? Can anyone confirm this?

Hello everyone i have just joined and would like to let you know that i am a experinced alarm/cctv/access control engineer started in 1990 just after i got married .i am currently looking for sub-contracting work or any work to help and build new customers.if anyone requires my cv then please feel free to e-mail me xxxxxxxxxxxxxxxxxx .i am willing to travel nationally to work and references are available if required.speak to you soon

Hi all, I thought that I posted something here, I must have clicked the wrong button and it never posted. I hope to use this forum to help me with all my security issues. looking at the posts it looks like I made the right choice in forums. angusboy. PS I am from Dundee in Angusshire, the city of discovery.

I'm in Australia...

Hello just thought I would introduce myself, I have worked within the security industry for about 12 years now, and worked around various areas, from manned guarding to CCTV operator to internal investigations to theme park security. Then one day decide on a change where i went into ground investigation, that was the only normal job I have ever had, became very bored of that and had a burning ambition to work for myself, so for my sins, about 3 years ago, I got some training and set up as a locksmith, this was the best thing I ever did, and it went from strength to strength... i found my customers were constantly asking me if I could recommend someone for an alarm or…

Well, this is post #1! I've read a few posts and having finally just purchased my first alarm system for my first house, I thought it might be a good idea to set the ball rolling with the introductions should I require any advice upon installation! Just to give a small summary, I have purchased a Gardtec 595 (v1) system with Nova 6 external sounder and twin G-Tag RKP's. A DIY system... it's going to be a fun weekend when I move in!

Having learned that DIY wirefree kits are univerally believed to be cack, I am here to pester you all into trying to reduce the cost of a professional installation by doing as much of it as possible. I will try and keep the questions to the relevant forum areas though, so if you see any, please help an enthusiastic amateur Nys

Greetings All. I moved into a property that has a 9800 scantronic alarm system fitted. Its a bells only system. I year ago it started going off so my Mrs rang the number of the "engineer" that fitted it. The end result was that the internal siren cable was cut and the fuse pulled out from the spur socket. I'm not sure why this was suggested and was quite surprised when I got home to find this out. Anyway, now whenever I power up the system again all I get is a code "SR" - which the manual states is a sytem reset. I'm really keen to get the system working again and know it needs a new internal battery and the siren internal reconnected. However, I'm a bit stuck with …

Hello - just a note to say hi. I am in alarm signalling (Emizon Networks) using IP and GPRS over a managed platform with the Bosch and Pyronix TCD's along with the Castle IP unit.

Hello all ,heres my problem have had a new alarm fitted to my house,all works ok,the installer kindly set up my old alarm (modern alarms series 3400) to cover entry points to my garage and shed ,now when he restarted the system after setting it up the display comes up with alarm needs master reset,which he dosnt know the code for,have tried contacting original installer but no luck with number,can any one help me or point me in the right way to getting the alarm up and running thanks alot

Hey all, Install engineer/apprentice from '//.Large National Installer.//' in the London area for the last 2 years. Great forum. Peace, Nick.

Hi I am a CCTV and Access subcontractor that has just set up. I am in the Waterlooville area of Hampshire. I will travel nation wide for work and have 10 years experience. Please contact me if you have any oportuninties for work or contacts that I may find usefull.

Hello all,dipped in and out of the site many times over the years and found some really useful info but never signed on,thought it was about time i did. very quick c.v..been in alarms 13 years now,started back with securicor and got swallowed up with the shorrock,initial,rentokil thing and stayed for another 5 years until it got time to move on and and came over to a.d.t and 6 years on am still here..thats it really..look forward to posting some and reading more.

Hello every one, i have recently come across this site and thought i would say hello two every one else out there,my name is matt and im currently subcontracting for companys in the devon and cornwall area and thought i would say if any one needs any security systems fitting in the south west area to give me a email at mwsecurity@hotmail.co.uk.I am very expirenced on various systems including galaxy,aritech and menvier and lots more including various access systems and cctv and some fire,anyway thought i would advertise my services if any body needs anything doing give me a bell. matt