Hi i have a ademco microtech accord xpc i believe and want to replace it wirh new keypad and control board. 

Would like to keep the existing sensors and wiring. 

The keypad on this one is not responding properly and the fuse is blowing on the panel every 6 months or so. Thanks

I'd be wanting to find why the fuse is blowing, that's more likely a wiring or peripheral issue rather than the panel

Thanks for the reply. But nothing has changed as in no one has touched wiring or anything. And it doesn't blow straight after changing.??

OK but fuses don't blow for no reason. Is it overloaded etc. Which fuse is blowing 

 

But yes you can reuse your cabling but if it has issues those will continue on the new panel

keypad one because that keeps going blank but than also the bell one gos i think because that stops working

Further diagnosis with a multimeter is required.

The least likely thing popping the fuses would be the panel.

Replacing only the panel will rule out a keypad but there are many other parts of the system.

Agreed a fuse is their to protect the control panel, they dont blow because the there is something wrong with the control panel.

On 30/05/2021 at 14:00, Honda3 said:

keypad one because that keeps going blank but than also the bell one gos i think because that stops working

Either way get rid of that junk and if you have fault you will have to fix it 

 

So Honeywell flex might do the job for DIY fix , I assume you know how to programme an alarm? Otherwise local installer maybe your best option 

 

You may end up having to open some detectors , but they probably as old as the panel and plastics can break 

 

If your not on tight budget then get all new sensors aswell 

 

If your not on tight budget and still want to reduce cost , then probably what your protecting isn't worth it anyway , so just scrap and leave it on the wall and have no alarm 

 

Otherwise wireless DIY pyronix enforcer will do you....

Thanks for all the replies. Ive cut 4 inches of the kepad wire and reconnected it. Lets see what happens. 

I defo dont want to go wireless.