Jump to content
Security Installer Community

Bentley F133 Revisited.


Recommended Posts

1 hour ago, lancepar said:

Hi,

From the panel schematic I am assuming I have a SCB in the bell box,  is that correct,  I've not been up to it yet either?

The fuse F2 is good.

The battery YUASA NP12.6-12 12v.2.6ah has expired as it only read 4.5v when I measured it, what would peeps replace it with?

Even with a good 12v battery and powering pins 7&8 in the panel the bell does not ring so I suspect that it is buggered as well.

I'll keep playing.

 

Cheers

?

 

 

 

They stopped making 2.6 ah in 1998 the battery should be changed evey 4 years so at the very least the battery has been pulling the charging circuit down for the last 18 years I bet the transformer hums like an electric chair in full killing mode.  its not beyond repairable, but the cost to repair outweighs the cost to replace,  I stopped fixing TV's in 1997 for that very reason. Especially if you factor in that you wont be able to buy the components for something that old as components are now much smaller. But on the bright side you have saved 20x £50 per annum in service visits and you haven t been burgled it may be that you have had your moneys worth from it.

  • Upvote 1
Link to comment
Share on other sites

Well the Bentley F133 is all working again like it was in the 1990's.

Transformer was never noisey and it's charging the new battery, same physical size but 2.8ah.

Found a loose wire in the box when checking out the bell and now its got its ding-a-ling back........ jobs a good un.

Thanks folks.

Stay Alert

?

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.