the 232 usb convert is showing up in the device manager com port 7 if i move to another be slot it says comport 6

 

dont think it is the com port issue

8 minutes ago, Louis Donovan said:

no first time using the software and its becomming hard to get around the issue using direct

its agilty 1 panel look like

You have an old machine with a 232 port on it? 

i dont at this moment of time

could it be panel is old

 

i will be getting agility 3 panel soon to see if that the problem

I'd be looking at the 232 convertor too. Sometimes they just don't work transparently enough.

Use a program like termite to test the rs232 converter

3 hours ago, Logan said:

 

 

When you upgrade Get something better than a agility 

 

Go with pyronix, scantronic or HKC 

I don't think scantronic have a 2 way rf option. 

Well as your recommending stuff maybe know something about them? 

Also how do you rate the range and security of the pyronix 2 way option vs the hkc? 

2 hours ago, Logan said:

I hadn't seem to have any problems with the enforcer i have  (not the one i need to default)  i have tested supervision of wireless detectors and it does seem to work.  Still cant beat the euro 44+

 

Haven't ever experimented with HKC. Only preformed basic operations.  Set/unset 

No problems reported or no problems etc. 

 

Have a read of this

https://www.pentestpartners.com/security-blog/hacking-wireless-house-alarms/

 

There are others on yale etc users don't have 'problems' either but I doubt you could recommend stuff on that basis?