MarkJohnson Posted January 15, 2018 Share Posted January 15, 2018 Morning gents! Based on a lot of background reading I did on this forum, a Texecom Premier Elite was fitted about 6 months ago and a great alarm it is too! Problem I have now is that when cutting off some cornice at the top of the ceiling, we completely forgot that the telephone and alarm cable was run through there. As such, we cut through the damn thing. I'd like to patch this up as it leads to a key patio door sensor. The bigger issue is that the cable is crappy CCA (copper clad alu) as opposed to quality cable. Don't ask how or why that was used. So I guess question is how do I connect this crappy cable back up again? Can't solder it. I can only think of something like this (a pack of ten is a couple quid and they are tiny): https://www.tlc-direct.co.uk/Products/WA415.html Also, as the system is 'live' and I don't wish to short anything, how would I power it down temporarily? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/ Share on other sites More sharing options...
MarkJohnson Posted January 15, 2018 Author Share Posted January 15, 2018 (edited) Just to clear up on the above, my choices (unless you guys have a better suggestion) at the moment to fix this mess are: (1)Lever splicing connector: https://www.tlc-direct.co.uk/Products/WA415.html (2) Some crimps: https://www.tlc-direct.co.uk/Main_Index/Cable_Accessories_Index/Crimp_Lugs_and_Tools/index.html (3) A small, 2a connector strip (two-way): https://www.tlc-direct.co.uk/Products/TLCON2.html Edited January 15, 2018 by MarkJohnson Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473139 Share on other sites More sharing options...
Hillbilly Posted January 15, 2018 Share Posted January 15, 2018 Due to the location I would go with crimps Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473140 Share on other sites More sharing options...
al-yeti Posted January 15, 2018 Share Posted January 15, 2018 Due to location and space I would go with solder and any type of wrapping , not gift wrap though 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473144 Share on other sites More sharing options...
MarkJohnson Posted January 15, 2018 Author Share Posted January 15, 2018 Thanks for the replies folks. With regards to solder, I don't think it would work, primarily because it's basically aluminium cable (CCA) and also it is 2.4m up, so a bit awkward to solder on a ladder. But the CCA issue here is the real problem, otherwise I'd have soldered the damn thing already. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473145 Share on other sites More sharing options...
sixwheeledbeast Posted January 15, 2018 Share Posted January 15, 2018 Use the cable as a fish and rewire would be my first consideration. CCA will solder with the right temperature and solder. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473148 Share on other sites More sharing options...
al-yeti Posted January 15, 2018 Share Posted January 15, 2018 3 hours ago, MarkJohnson said: Thanks for the replies folks. With regards to solder, I don't think it would work, primarily because it's basically aluminium cable (CCA) and also it is 2.4m up, so a bit awkward to solder on a ladder. But the CCA issue here is the real problem, otherwise I'd have soldered the damn thing already. You making this all up? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473154 Share on other sites More sharing options...
james.wilson Posted January 15, 2018 Share Posted January 15, 2018 Id solder and heat shrink. Melting temp of ali is quite high compared to a soldering iron. Its not copper pipe you dont need a blow torch securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473177 Share on other sites More sharing options...
norman Posted January 15, 2018 Share Posted January 15, 2018 8 minutes ago, james.wilson said: Its not copper pipe you dont need a blow torch Never stopped JBE Nothing is foolproof to a sufficiently talented fool. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473180 Share on other sites More sharing options...
james.wilson Posted January 15, 2018 Share Posted January 15, 2018 doubt a lighter would melt it before it soldered securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41856-texecom-premier-elite-cut-cable/#findComment-473181 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now