ThornGamma6 Posted July 20, 2017 Share Posted July 20, 2017 Hi, I'm having Issues with my Accenta G4 and all its doing is the RKP is just displaying Accent G4 RKP F131-01-111 I have 6 zones in use and all pirs are the Pyronix Equinox pirs and 1 of them is above the keypad in the corner of my hallway by the front door. would it be the PIR causing the fault? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/ Share on other sites More sharing options...
datadiffusion Posted July 20, 2017 Share Posted July 20, 2017 AFAIK the LCD keypad can only translate 'LED data' from the system into locally defined messages. So if the keypad is showing what I would assume is the 'default screen' it suggests the data connection to the panel has been lost, just the power remaining, or the panel is goosed other than the PSU. Have you tried turning it off and on again? So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466190 Share on other sites More sharing options...
al-yeti Posted July 20, 2017 Share Posted July 20, 2017 1 hour ago, ThornGamma6 said: Hi, I'm having Issues with my Accenta G4 and all its doing is the RKP is just displaying Accent G4 RKP F131-01-111 I have 6 zones in use and all pirs are the Pyronix Equinox pirs and 1 of them is above the keypad in the corner of my hallway by the front door. would it be the PIR causing the fault? Have you replaced the keypad recently Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466192 Share on other sites More sharing options...
ThornGamma6 Posted July 20, 2017 Author Share Posted July 20, 2017 1 hour ago, al-yeti said: Have you replaced the keypad recently Tbh Its second hand and the panel says Accenta 8 mini on the front 1 hour ago, datadiffusion said: AFAIK the LCD keypad can only translate 'LED data' from the system into locally defined messages. So if the keypad is showing what I would assume is the 'default screen' it suggests the data connection to the panel has been lost, just the power remaining, or the panel is goosed other than the PSU. Have you tried turning it off and on again? I've tried turning it off and on again but doesn't seem to be working Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466199 Share on other sites More sharing options...
MrHappy Posted July 20, 2017 Share Posted July 20, 2017 put the rkp onto a foot long "flylead of cable" & see if it works... Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466200 Share on other sites More sharing options...
ThornGamma6 Posted July 20, 2017 Author Share Posted July 20, 2017 It does have 1ft long cable going to the panel and it doesn't work mate. This system was removed from a building that was getting demolished and I got first dips into the alarms I even saved to Pyronix Deltabells Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466201 Share on other sites More sharing options...
MrHappy Posted July 20, 2017 Share Posted July 20, 2017 you've tested the cable between controls & rkp ? Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466202 Share on other sites More sharing options...
datadiffusion Posted July 20, 2017 Share Posted July 20, 2017 (edited) 16 minutes ago, ThornGamma6 said: It does have 1ft long cable going to the panel and it doesn't work mate. This system was removed from a building that was getting demolished and I got first dips into the alarms I even saved to Pyronix Deltabells Historic England won't thank you though; next time just go for the copper, and spend 1/3 of the payout on a Vanderbilt SPC. Trust me. Edited July 20, 2017 by datadiffusion So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466203 Share on other sites More sharing options...
ThornGamma6 Posted July 20, 2017 Author Share Posted July 20, 2017 36 minutes ago, MrHappy said: you've tested the cable between controls & rkp ? Yes mate I have 27 minutes ago, datadiffusion said: Historic England won't thank you though; next time just go for the copper, and spend 1/3 of the payout on a Vanderbilt SPC. Trust me. I got a bit of copper which I'm going to sell for scrap Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466205 Share on other sites More sharing options...
sixwheeledbeast Posted July 20, 2017 Share Posted July 20, 2017 You have a waste carrying license? 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41412-accenta-g4-issues/#findComment-466206 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now