Bejomest Posted April 26, 2017 Share Posted April 26, 2017 I'm just in the process of purchasing the above combination and my question is whether I need to invest in a panel or not? I'm wondering if the comwifi can be installed without a panel, so that I can then use the iPhone app as my panel once installed and therefore not have to fork out for a panel at all... Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/ Share on other sites More sharing options...
GalaxyGuy Posted April 26, 2017 Share Posted April 26, 2017 Lol - Nope, the comms modules are just serial pass through devices to communicate with the control panel CPU. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462285 Share on other sites More sharing options...
Bejomest Posted April 26, 2017 Author Share Posted April 26, 2017 So the keypad app doesn't provide any additional functionality? Reading the information from the brochure highlighted below, I thought I may be able to save the investment in a physical keypad if I could set up comwifi without one and then use the app... Keypad App The Keypad App emulates a Premier Elite keypad interface. This allows end-users, master users and engineers the ability to remotely control the alarm system, as if physically standing in front of an actual keypad connected to the system. In addition, the Keypad App includes Texecom’s SmartKey interface, providing an intuitive and simple method of arming, part arming and disarming the system. Up to 3 programmable outputs can be triggered from the SmartKey interface. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462286 Share on other sites More sharing options...
Bejomest Posted April 26, 2017 Author Share Posted April 26, 2017 I must also clarify that as a 'newbie' my terminology is poor - I meant 'keypad' in my initial post. Apologies for any confusion... Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462287 Share on other sites More sharing options...
datadiffusion Posted April 26, 2017 Share Posted April 26, 2017 (edited) Yes, you need a keypad... However... unless you need all 48 zones, you might be better off with a http://www.texe.com/uk/uploads/PremierElite12-W_LIVE_web_6.pdf If you only use the keypad in an 'emergency' it can be hidden away just as you would with the 48 CCU. Edited April 26, 2017 by datadiffusion So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462288 Share on other sites More sharing options...
al-yeti Posted April 26, 2017 Share Posted April 26, 2017 That's if you can setup the comwifi Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462289 Share on other sites More sharing options...
datadiffusion Posted April 26, 2017 Share Posted April 26, 2017 LOL! So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462290 Share on other sites More sharing options...
al-yeti Posted April 26, 2017 Share Posted April 26, 2017 24 minutes ago, al-yeti said: That's if you can setup the comwifi Of course I can't either +1 come on guys Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462291 Share on other sites More sharing options...
sixwheeledbeast Posted April 26, 2017 Share Posted April 26, 2017 Are you installing the kit yourself? This type of kit is designed to be installed by experienced engineers. If your not sure what you are buying, are you sure your competent to fit it? Just a word of caution, many a DIYer has come here and wasted months of time trying to install there system only to fail, get frustrated or end with a part working system. Minimum kit you will need is the Panel, Keypad and Comms Interface that is assuming you are reconnecting detection devices. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-462292 Share on other sites More sharing options...
installer_dale Posted June 1, 2017 Share Posted June 1, 2017 Technically you won't need a keypad but it's strongly recommended. And you'll need a usbcom to configure the panel to use the comwifi in the first place. But if you don't know that, I wouldn't recommend trying to setup a comwifi unit in the first place! They are a waste of space until (hopefully) new the ones come out Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41185-texecom-premier-elite-48-comwifi/#findComment-463482 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now