Need a bit of help, from the oldies like myself perhaps. At one time, when dinosaurs walked the earth, we put our own warning devices together. A sounder, microswitches , battery, and a small sab module. I need these sab modules, many had on board batteries and occasionally timers, but I'm not in a position to the pros and cons. Looked just about  everywhere on the net but ..nothing. It would be appreciated if anyone could keep a look out for these little sab mods. I'll buy you a drink when I next see you.

http://www.ebay.co.uk/itm/Dummy-burglar-alarm-bell-box/281770101281?_trksid=p2060778.c100277.m3477&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140725134205%26meid%3D267d56c10718411dbb742ebdb8a68e5a%26pid%3D100277%26rk%3D4%26rkt%3D4%26sd%3D141741914884

I saw one of them the other day I will have a look tommorow but will need a new battery as it must be 900 years old.

just buy an old scanny eurobell and use the mod

It would be appreciated if anyone could keep a look out for these little sab mods. I'll buy you a drink when I next see you.

£19.80 + carriage

"...£19.80 + carriage.."  I was thinking more in the region of a tenner or less.

"...£19.80 + carriage.."  I was thinking more in the region of a tenner or less.

I was thinking they should sold them 20yrs ago...

Haha we used to put the bell together in the passenger seat of the van on the way to the job to save time, drill out the C type cove for the strobe and everything.

http://www.ebay.co.uk/itm/Dummy-burglar-alarm-bell-box/281770101281?_trksid=p2060778.c100277.m3477&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140725134205%26meid%3D267d56c10718411dbb742ebdb8a68e5a%26pid%3D100277%26rk%3D4%26rkt%3D4%26sd%3D141741914884

I like the way the siren has either melted or been hammered flat to fit.

Tat-tastic.

True story, I recognised it on Fleabay, it's a company ADT bought in 2001 called briggs, I had breakfast with the senior engineer from there this morning (I posted him the link yesterday) he says the sirens were a bulk buy that were too big, so the stores guy who's job it was to assemble these had to melt them with a heat gun to fit.