Adi Posted August 13, 2013 Share Posted August 13, 2013 suck a duck, i said OP's reading was piddly, lol I really can't be ar**** with it anymore. Link to comment Share on other sites More sharing options...
datadiffusion Posted August 13, 2013 Share Posted August 13, 2013 They could have run a small radio off that! made me laugh once when it was just us in an empty site, electrics stripped out, temp 2 way fuseboard under exposed meter.... Our radio and batt charger was just under the amount to make the meter move all day!! So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Amps Posted October 18, 2013 Share Posted October 18, 2013 On a system right now that is a GD48 and has been f/a on several ccts over the last twelve months. Mainly the DT on a tmd which is the furthest device from the panel. Checked for induced ac and have a reading of 4.2v. I suspect this can change anytime though so after changing the tmd and recabling with no result a suppressor seems the last option. Does being the furthest device mean anything to you guys? Anyone know what Galaxy say about induced ac and what amount is normally acceptable on their panels? Link to comment Share on other sites More sharing options...
MrHappy Posted October 18, 2013 Share Posted October 18, 2013 Does being the furthest device mean anything to you guys? Measured the voltage @ the sensor with the system running on its battery ? Mr Veritas God Link to comment Share on other sites More sharing options...
Amps Posted October 18, 2013 Share Posted October 18, 2013 Measured the voltage @ the sensor with the system running on its battery ? Yeah works fine 13.46v. The building is small, offices in an old stable block. Link to comment Share on other sites More sharing options...
james.wilson Posted October 18, 2013 Share Posted October 18, 2013 Also does that device self test the pyro with a resistor, what does it draw when that occurs But as mr h, looks like volt drop securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Amps Posted October 18, 2013 Share Posted October 18, 2013 If it was volt drop wouldn't both devices on the tmd go into alarm? Link to comment Share on other sites More sharing options...
james.wilson Posted October 18, 2013 Share Posted October 18, 2013 Depends one side may need more voltage securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.