I intend fitting 10 Dome Cameras. They are to be linked to a DVR,Keyboard and Monitor in the Managers office in the same building as well as three other monitoring and control points in offices 200 yards away.

So the kit would be 10 domes, 4 monitors and 4 keyboards with a 2Tbt DVR in the Managers Office. It doesn't really matter what kit as long as it's reliable.

Question - - is there a DVR out there with four monitor outputs or do I need to go down the Matrix route which obviously increases the cost somewhat.

Thankyou.

Question is what do you need to display on the four different monitors?

Could you do this through the clients network on their computers?

Could you do this through the clients network on their computers?

That's what I would be looking at to keep costs down.

Then yes, easilly doable.

I don't think so that  any of the DVR can give you this feature.

I think the cobra elite from cctv direct has a main output and 4 seperate spots but i,m not sure how much control you have over them. I would give them a bell and ask

I know the samsung dvrs can use their free sns64 software

Edit: nvrs

Edited February 21, 201313 yr by fozzies

I know the samsung dvrs can use their free sns64 software

Edit: nvrs

 

good luck if you need to call their tech though!

The Luxrite range of DVR's has 4 monitor outputs.