I have moved into a house with an //.National Installer.// accord xpc alarm system (red, green and blue buttons, has 'paddle' key fob disarm feature). The panel has been trouble free, however that has just changed. Maintenance has revealed that the panel has been locked with an engineers code, so currently whole thing is disconnected and shut down to stop the noise.

How will the service engineer get around this, right now I have a great system that doesn't work until we can get back into it and bypass or reprogramme the code - unless there is a code that will bypass all?????

No doubt //.National Installer.// will be able to help, but will charge mega bucks in the process!!

Would very much appreciate any help or advice offered.

Paul

Fleet

Hants

Maintenance has revealed that the panel has been locked with an engineers code,

All professional panels have an engineers code - either //.National Installer.// or another installer familiar with the panel should be able to help.

All professional panels have an engineers code - either //.National Installer.// or another installer familiar with the panel should be able to help.

*QFA*

The panel can be reset to it's factory defaults quite simply. you need an engineer familiar with this panel.

Regards

Bellman

Or surely one thet can RTFM.

What area are you in?????

anyone have any idea how to program a new key fob.  The keypad is not the later mark 7 with A and B buttons and integral key fob reader.  Mine has a key fob scanner next to the key pad.

 

Thanks All...

I would start a new thread. It sounds like you are talking about a galaxy mk7 keypad.

It will be a pyronix sa reader

Ah yeah

On 07/04/2006 at 22:31, leesutton said:

What area are you in?????

Your sig www link doesn't work.