james.wilson

remove all the cabling for it in the control panel, power and circuit. YOu will then have to remove the tamper from the loop and link out the circuit

The hkc has a 12v input

you will need to enter your code after powering it back up. Or press reset im unsure. But if you have faults it wont let you reset it till the faults are cleared, ie dont exist anymore

Whats the models of what you have we may be able to work it out?

thats the difficult bit for our sector. Office staff can be but the engineers have to have reduced hours

When furloughed no you cannot do any work for the company that has furloughed you.

be a long wait I reakon

i thought it started in china?

Wow that's a hell of a bug with massive implications.

Your still in full time education too

I could program a 520 / 504 without a manual

Not by fw files. There is an app for upgrading that will have firmware contained in the exe

If everything else is working I can't see how they are related. There usually isn't any power going to a contact. When was it last serviced etc?

Nothing from nsi yet same response waiting on an official response from the Home office. However Imo its not an inspectorate thing it's a trade association thing

After the news last evening I am currently trying to get official guidance on our status etc Bsia released this yesterday https://www.bsia.co.uk/blogs/43/bsia-to-call-on-government-to-clarify-cr

Based on the brief a timer relay?

Which alarm light?

Normally you would disarm during entry time. Bear in mind most alarms are false are user error, sending the entry fault / fail to disarm in time makes sense

Cos it's a timeout it's telling you. If you read the log it will give you the order

hi there

That's why server rooms are air conditioned. As 6 says treat it like a server and keep as cool as you can

Hard drives will have a short life in heat

Ideally security shouldn't be unless you mean IP stuff then it's own switch marked as such

Is it naff detectors missing you on the times it doesn't go into full alarm or another sensor picking up through an open door etc

Those zones need programming out That's why omitting allows it to arm