james.wilson

Following on again from the LPS 1277 topic and after the dual path fail test on a redcare GSM this afternoon I did exactly the same on a Grade 3 Dualcom GPRS. Powered down at 15:20 9/3/12 as shown in this video. Last signal currently shown is the tamper from when i put the galaxy into engineers to open the panel. ie no GPRS fail or PSTN single path failures. Much less a confirmed comm fail (ie both paths down). System not put on test (as it wouldnt be in the wild if it was attacked. Exactly the same procedure as the redcare test. Unit is still powered down, im hoping that something will show up at some point....... Last Checked at ARC @ 19:12 9/3/12

http://www.thesecurityinstaller.co.uk/community/files/file/250-optima-xm-manual/ pretty much the same. If i recall the XL only gave a backit keypad

it can do that now using the basic alarm integration. Just needs an output from the panel to show set status to the controller. If you need this i can look at knocking it up mate

could be done via android but it would need the app on the pc on site running all the time to actually open the door. Plus it needs paxton pro to get the web version which costs. Do you have any other gear on site?

paxton make a caller id module for net2, that way you can control and record access?

once its out ill have a play and see what i can do. The web app was a closed beta and i wasnt on it lol

no i cant port it to that. But when the new version of net2 comes out I should be able to do an android app for the same thing,

If anyone has a use this is a small app that will open a single door. Designed for use on a pc in reception etc to open a set door for a security guard etc that doesnt need full net2 access.

i dont see that the replacement issue is a problem. This would be on a rolling upgrade programme AFTER a loss or during a change of insurer. It depends what the insurers do with this. They have 3 choices as i see it. LPS, Form xxx or status quo

great piece jim. Id agree on the lps 1277 point im also intrigued as to what happens here regarding demand etc

Sorry Richard. Its not a major problem, least of all with files that size. I tend to move them to the downloads section if they are not currently listed. But if they were say 2meg and posted 20 times it would give me a concern long term

Rullad The user manuals section is available to public members, the engineer section is not. For ease of management etc id prefer if we can that we link to those sections rather than have lots of copies of the same thing.

the xm6 manual is in the downloads section. Id advise checking there