PeterJames

Non-residential premises used for recreation such as theatres, cinemas, concert halls, exhibition halls, sports halls, public houses and restaurants. The people using such premises can be expected to be unfamiliar* with the layout and maintained exit signs should be installed. However, if the normal lighting for the premises may be dimmed or turned off (e.g. cinema or theatre), a maintained emergency lighting system should be installed. The recommendations in this point 4 are firmly stated in BS 5266-1:2011, clause 9.3.4. Premises used as sleeping accommodation includes hospitals, nursing homes, hotels, guest houses, clubs, colleges and with boarding schools. Persons using premises of this kind may be unfamiliar* with their overall layout and/or may be infirm therefore maintained exit signs would be good practise.

The early Racall stuff worked like a Map 6 IIRC

Hi and welcome Racal Guardall stuff is all obsolete now its been a long time since I looked at the external stuff but if it is just low voltage with nc/no circuits you could use a GJD detector or a watchout

The internet is the real world unlike school where you win a prize for finishing the race even if you came last. The real world is full of life lessons, if you write a post that is not factual, or that somebody disagrees with you will most likely get a down vote. The system is there to encourage you to write facts when it comes to technical stuff rather than blagging it with poppycock, and to encourage you to try to be nice. It also helps you to accept rejection, because in the real world there are some people that will down vote you for no reason other than they feel like it. Think about what you wrote and why people downvoted you, it will help you in the real world to get along.

Just out of curiosity why do you want the installation manual

You may be right I thought it may be because we are still buying keypads for them

If you do not want people to not dislike your posts then you need to make nicer posts. I up vote stuff I like, and down vote stuff I dont like just like any other normal forum nerd. I dont need instructions from anyone.

Hi and welcome Ian

The Gardtec 600 is a direct replacement I believe its still produced

Hi Phil Welcome, but please dont post the same question in multiple topics it makes the place untidy everyone can see your post here

You can add a dialer to any panel but you would need someone to default the engineer code and reprogram it.Find a decent company, invite three to quote, ask them if they are able to takeover and update what you have before you get them around for a survey. Choose the company you are most happy with not necessarily the cheapest. A service add sounder and GSM dialer would be around your budget

External sounders are overrated in my opinion, they get ignored 99% of the time, unless you count the complaints from neighbors when it does go off, and they are one of the first things to go wrong. If you have an alarm installed already get someone to service it, fit loud internal sounder (to scare anyone inside) and a dialer to call you, it will be more reliable than a Ring system and you wont get anyone hacking into it and watching your missus in the hallway

Is that some sort of reference to me living in Brighton, because I ve told you I dont fancy men

£100.00 or thereabouts

If you dont know the code then the user manual wont be much help, take a look at the bell box to see if thee is an installers name on it, give them a call and they will default the code for you for a small charge

You can try

Hi and welcome just ignore the banter, it is a bit like being back in school in here sometimes......which reminds me does anyone want to buy a dinner ticket for tomorrow?

Hi and welcome

Not vandal resistant not 2 wire Imran,. I use door entry direct just call them tell them what you want and give them your email address, they will send you a quote 0208 621 6210

That where I buy my batteries from too!

It is a big problem, we had several CCTV recorders running on XP, we still have albeit they are not connected to any networks. The same goes for win 7 machines we have a couple of systems that we cant upgrade to 10 because the hardware required to view the cameras doesnt work with W10. We have told the customers that they either need to upgrade all the cameras and the recorder, or go with an off-the-shelf hybrid recorder.

They only have the albion in Brighton

I have always lived on the outskirts of Brighton, the office has never been in Brighton it was Worthing its now Storrington.

My last house I had lights curtains and heating connected to my G500, it used to open and close the curtains switch lights on and off and control the heating on a timer along witha separate digital temperature thermostat. You could do anything the the outputs combined with JK flipflop and a few erl timer relays. My remote app was Galaxy gold back then, I used to have to stop the car, connect my lappy to my phone physically and log into my alarm in order to switch the heating on on the way home.

I use RF lightwave you can more or less instruct it to do whatever you need using IFTTT Frost protection is never overridden