The former owner was in IT I believe he fitted the alarm himself and left me with all the codes, I was not phased about this as it works well and thinking I know a bit about these things I obtained a manual on line.
Having done relay fitting before I thought I could do this fairly easy but I cannot see in the manual how to do it.
I am pleased I can use other outputs but I still need to programme it.
If its possible without putting you to too much inconvenience could you give me step by step guide to programming o/p 1 to activate on an alarm in area B.
ie what main section I need such as global then the sub menu and so on thanks in advance.