Nova-Security
-
Posts
3,344 -
Joined
-
Last visited
-
Days Won
24
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Nova-Security
-
-
3 hours ago, datadiffusion said:
(both Elmdene, who at the time still made in the UK)
They not now, our HS500 bells have a made in china sticker on them
-
0800 number is ADT
-
2 hours ago, al-yeti said:
Still same with hkc can't use zero lol
Must be the old Airitech design team
-
Airtech had analysers built-in on zones 1 to 4 plug in card is a zone expander
Still a panel to beat, only fault was not being able to use a 0 and trying to explain that to a customer
- 1
-
I would also be careful if fitting a light that generates heat to any cladding.
- 1
-
Dont they own Texecoms building?
-
Its as above EOL resistors in heat shrink made by elemdene 8K2 / 8K2
-
They brought out the Mosiac panel and lost loads of money and customers
-
8 hours ago, al-yeti said:
Sage is independent
Won't you be stuck with RBS version
Never liked Sage although have used it for the last 30yrs
No Freeagent is separate company looks very good, but if you bank with RBS/Natwest you can get it FOC if you meet certain conditions.
Probably will have a look, accountant already has some other companys using it and he says its good.
- 1
-
You could do with a small bit of pipe over the LED and the receiver so it doesnt pick up any stray light
-
TBH never had any issues and if we need anything our business manager is out to us next day.
Had issues with others in the past on business and personal accounts.
-
Anybody using RBS Natwest Freeagent software for accounts ?
Was going to upgrade our sage to the cloud version, but or bank manager has put forward theirs, just after any thoughts
-
17 hours ago, MrHappy said:
IIRC "Viper foam detector"
pcb within plastic case, size of shock sensor
IR Led + Receiver below the case
Used to FA when the housing filled with webs or bugs ect...
Used to FA when it got dark after it had be powered up the 1st time
Google has no pics & I've not see one in yrs....
Just for H
Having a tidy up of the garage and cant believe i found one.
Gabs
You need a diode across the relay coil of that one you made to protect the transistor and possible a resistor to limit the current the relay pulls, well done on the MK1 cant wait to see your next projects.
Send me your address and will send this V foam to you
-
14 hours ago, MrHappy said:
IIRC "Viper foam detector"
pcb within plastic case, size of shock sensor
IR Led + Receiver below the case
Used to FA when the housing filled with webs or bugs ect...
Used to FA when it got dark after it had be powered up the 1st time
Google has no pics & I've not see one in yrs....
Never had a problem with them, used loads in the past
-
32 minutes ago, PeterJames said:
That said Imran (AlYeti) used to work in manufacturing for DA
Proper company DA pity they didnt want to evolve the abacus instead of selling to Bosch
Have a look at the latest company that are saying they are going to take all of the market www.boundary.co.uk and boundary technologies
-
9 hours ago, al-yeti said:
Vary rare it's changed though
Point being try before you default , I think op is a diyers tho or trying to access his own system after messing it up
Oh the G3 its automatically changed when you set up a new site and dial in.
But it may never of been connected, and programmed by hand so there is a chance
-
8 hours ago, al-yeti said:
If you say so dude , i not that experienced in galaxy , but even I can connect rs with a lead before defaulting
You might be able to connect the lead but not download if the UDL code has been changed ?
-
4 hours ago, GalaxyGuy said:
The Flex+ supports grade 3.
Oh dear, sounds like a dimension replacement.
-
11 hours ago, al-yeti said:
I thought you could do RF on all the zones like the g2 , your thinking dimension?
Only installed one flex, use G3 all the time
-
so what are you RF zones numbers 1021 to 1028 ?
-
Not sure on the flex but 12 zones on the panel ? add an RF module doesn't that take 8 up making 20 and your panel is a flex 20
-
Check the monitor first, are you using BNC, VGA or HDMI out of the DVR
-
Worked on a few, and changed eng code
-
11 hours ago, james.wilson said:
not that its relevant but HKC are testing their G3 panel.
Its out, we can buy them now apparently the rep has been in showing us the panel. Dont know who picked the colour of the end station.
Galaxy G2-20 Double Knock
in Control Panels (Public)
Posted
bs4737