[Gent Panel Clicking Every 60 Seconds]

Are you shure the loop is ok and its not the panels loop isolators operating.

 

If you have it on a bench and the loop is made up of a couple of meters of cable, the loop may be to short and resistance of the loop is not enough for the panel. 

[Flood Detector]

In the meantime I am thinking I can use the aux input on the door contact module and hard wire a flood sensor to that... 

 

Soz, re read your post, your hardwiring back to a wireless contact, cant see why the float switch wouldn't work then as long as it gets enough water to tip it over and float.

[Flood Detector]

That float detector will need a certain amount of water before it sits up and triggers which could be 10 -20 cm deep

 

you need something thats detects water by resistance

 

http://www.jablotron.com/en/product-catalogue-1/alarms/wired-devices/detectors/environmental/ld-12.aspx

 

or posh one

 

http://www.fibaro.com/uk/the-fibaro-system/flood-sensor

[Houseguard By Hi-tec]

85 years old, needs to be simple to use.

[Lander alarms]

I spotted that //.National Installer.// in us are dsc controls which brings to the point Which was the worse tyco kit ademco or mircotech or dsc

71611[/snapback]

Tyco own DSC, cant be long before DSC is going to be the preffered //.National Installer.// panel over here.

[Lander alarms]

Galaxy was called the Exsecutive 1000 i think which lander made.

where the speiling theudfhgfg gone.

[omnicron 8000 alarm panel]

and if this fails try a large hammer

71010[/snapback]

If im correct the buttons are very stiff so have you tried pressing fairly hard(with a hammer).

Who likes the hammer then......

[omnicron 8000 alarm panel]

Are you using the alarm now, do you know the old user code ?

[Old Shorrock 1500]

No mention of one of the first muliplexed panels, the 2000 and the CATS coded alarm transmitters, Acorn at the time a great little panel, why did they have that dull green and brown colour scheme for their early panels like the 72