Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,443

  • Joined

  • Last visited

  • Days Won

    129

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Your better off scrapping it
  2. al-yeti
    What PIR is it , main thing is not shorting the power out and blowing a fuse As above it could be that your cable is damaged , so first thing would be to get the cover off, and see with a meter if power is available at the power terminals inside the PIR Then go down the PIR replacement route
  3. al-yeti
    So they keep saying , then did the Evo range , but probably eventually if they get there ha off the ground or like originally planned find some "mug" to buy them
  4. al-yeti
    Or we hope he can solder
  5. al-yeti
    There you swb to the rescue you model number to purchase
  6. al-yeti
    Ok perhaps one of the others can answer which contact you should get ,I am not familiar with resistor choices on the texe Assume you got pirs with selectable resistors , what have you set them to currently , for alarm and tamper?
  7. al-yeti
    Was there a resistor pack in the texe?
  8. al-yeti
    Perhaps give model PIR model number assuming you had built in resistors And door contact model? Assuming no resistor ? Probably if you required the door contacts probably do e them wrong or wrong resistance What previous Honeywell system was it
  9. al-yeti
    Well it does say coming soon dude Surely that's clear enough.....
  10. al-yeti
    As above your using wrong button
  11. al-yeti
    You could wire a keypad to the enforcer tho
  12. al-yeti
    The tcc8m
  13. al-yeti
    TCPA2B I thought this was a panic button and has to be a v3 RF card And the other one is for the evo series I think pretty sure it work with with it you want the round disc version dude
  14. al-yeti
    It will still work ...
  15. al-yeti
    Oh yes , I forgot about the title lol
  16. al-yeti
    Ion not all plastic cases ?
  17. al-yeti
    Out of curiosity you have power at each gate Wouldn't ethernet of mains work better ?
  18. al-yeti
    So you need the tamper proof box and the grommet should fit on it aswell and do as Mr H says or he send the boys round
  19. al-yeti
    Taking a guess you can However there's always a way to get the 10mm back to the cu imo I say 10mm so you do it once
  20. al-yeti
    Battery change every 3-6months? Led flash won't tell you it's working properly
  21. al-yeti
    Restart options?
  22. al-yeti
    It's cheap to buy either way just replace it or both like for like Better to update tho
  23. al-yeti
    If you shave your head put a green rain coat on shoes will look good , I buy you a kebab in southall
  24. al-yeti
    You lose the two outputs on the main board of you fit this card , and end up with two on the card and then op3 is still with same issue Did you try and restart panel after setting op3 ? Hopefully galaxy guy will see this he knows the panel better
  25. al-yeti
    Will be ok on a church roof with pallets tho
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept