Jump to content
Security Installer Community

MrHappy

Global Moderator
 View Profile  See their activity

  • Posts

    17,789

  • Joined

  • Last visited

  • Days Won

    715

 Content Type 

Everything posted by MrHappy

  1. MrHappy
    Your battery's knacked & I'd assume your panel is overloaded by the current requirements of 2 bell c/w strobes
  2. MrHappy
    yes, he's a prick... fob = RP128T4RC On other Risco products its learnt via engineer menu's, unsure on wisdom
  3. MrHappy
    its a social experiment, we diagnose those with broken brains by their CAPSLOCKS rants your the 2nd today, should we get a 3rd our NHS funding gets increased....
  4. MrHappy
    Not sure how this helps the OP ?
  5. MrHappy
    hi.
  6. MrHappy
    My spider senses tingle "Aritech" ? I guess a tamper circuit would be used for the external bell ? the 2nd tamper circuit may be used for an internal speaker ?
  7. MrHappy
    haveIgotswitchedmodePSU dot com ?
  8. MrHappy
    I'd have whipped out my c/card & paid your employer with a smile on my face.... piece of piss to get a charge back on that scam
  9. MrHappy
    I've probably got beads on for single cores somewhere on stock, probably last used when enforcers where cream coloured & had no case screw I've got split cores somewhere a telephone bloke gave me at least 16yrs ago...
  10. MrHappy
    seen 'em with psu's & internal EWD however I was thinking per core- pic from ACT
  11. MrHappy
    retro.... but +1 + any unsed cores to 0v alarmcon, when you used temp cables did you use the same psu ?
  12. MrHappy
    If you open the Ewd whilst the controls are in engineering. They normally sound. Some products are able to be placed into an engineer mode & won't sound when the case is opened
  13. MrHappy
    I'd assume... A connection to logging print A connection into cortech BMS A provision of things switched by the intruder alarm eg lighting ?
  14. MrHappy
    had a good sized spider & lots of midges living in e-line's
  15. MrHappy
    IIRC all the elites produce both "mains fail" & "power o/p" when the mains is off I'd guess its something to do with the 4 pin molex pin on the switch mode psu the switch mode psu is also a bit naff & much more likeley to fail compared to transformer
  16. MrHappy
    enter code, then enter code & press reset
  17. MrHappy
    If you have the contents of your commercial premises insured (your stock may be expensive & portable) the insurer may have certain requires for the alarm eg signalling & holding a URN any thing wired to a telephone is vulnerable to a line cut, systems which text are the carrier pigeons of alarm signalling
  18. MrHappy
    you have insurance ?
  19. MrHappy
    I'd think you'd be better spending the money on couple of visits to clean the gutter in the autumn rather than alarms... or something like - https://hedgehog-gutter-brush.co.uk/
  20. MrHappy
    you need a 1 x Intruder URN & 1 x PA URN I assume new system, so will need 2 zones per PA to produce a confirm
  21. MrHappy
    The Rotherham factory is a sleeper cell.... every time you set your alarm with the app your location & forward facing camera is captured. A bloke in China tracks your movements his cousin at the takeaway is also an informant & should you have a ZTE mobile you may as well just surrender to the Chinese Embassy
  22. MrHappy
    Bet your ISP has a load of Huawei kit....
  23. MrHappy
    if the zones show open when the cicuit is closed did you check resistance between alarm & tamper pairs ? (2+ had tamper per zone (IIRC)) Before changing any devices I'll link zones out & see if the panels goosed, it will on or around 25 yrs old ?
  24. MrHappy
    you check the resistance of the circuits ?
  25. MrHappy
    Alarm batteries are lead acid gel batteries, I'm impressed if you've manged to top one up with water....
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept