DavieRasins Posted February 19, 2021 Share Posted February 19, 2021 (edited) Hi folks, Apologies for being a complete alarm noob, I'm looking for some advice regarding a couple of things. The buttons on the keypad decide to randomly stop working. So I was thinking I'd take the thing apart and clean the button contacts etc for a start. I'm assuming the tamper protection will go off as soon as I start opening/disconnecting wires. Is there a way to prevent this? So I can disconnect it, clean the internals, put it back and Bobs your aunty? The other thing is I need to replace the battery in the control panel, but I can't see an obvious way into it. Is there particular method to get the thing open? Will it also go berserk if I take the cover off? Any help would be greatly appreciated thank you. Edited February 19, 2021 by DavieRasins Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/ Share on other sites More sharing options...
james.wilson Posted February 19, 2021 Share Posted February 19, 2021 It will go into tamper yes. Consider its age and look at upgrading securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508722 Share on other sites More sharing options...
PeterJames Posted February 19, 2021 Share Posted February 19, 2021 You cant stop it from tampering unless you know the engineer code. the user code will shut it up once you have tampered it. But unless you have 2 keypads you may struggle, because once you have opened the keypad the buttons may not work at all. I agree with James its twenty odd years old, it was a goodish panel but it is old I cant think of anything electronic I own that is that old Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508723 Share on other sites More sharing options...
DavieRasins Posted February 19, 2021 Author Share Posted February 19, 2021 12 minutes ago, james.wilson said: It will go into tamper yes. Consider its age and look at upgrading I appreciate it is ancient, was hoping to avoid spending hundreds on a new system but it's served us well. 1 Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508724 Share on other sites More sharing options...
DavieRasins Posted February 19, 2021 Author Share Posted February 19, 2021 4 minutes ago, PeterJames said: You cant stop it from tampering unless you know the engineer code. the user code will shut it up once you have tampered it. But unless you have 2 keypads you may struggle, because once you have opened the keypad the buttons may not work at all. I agree with James its twenty odd years old, it was a goodish panel but it is old I cant think of anything electronic I own that is that old Are there any particular systems you would recommend? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508725 Share on other sites More sharing options...
PeterJames Posted February 19, 2021 Share Posted February 19, 2021 1 minute ago, DavieRasins said: Are there any particular systems you would recommend? I am sure someone will recommend a panel for you, I dont have any experience of the latest non trade panels Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508726 Share on other sites More sharing options...
MrHappy Posted February 19, 2021 Share Posted February 19, 2021 10 minutes ago, DavieRasins said: Are there any particular systems you would recommend? a proper one that's maintained by a proper co. Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508727 Share on other sites More sharing options...
al-yeti Posted February 20, 2021 Share Posted February 20, 2021 3 hours ago, DavieRasins said: Are there any particular systems you would recommend? For DIY? A grade 1 Honeywell panel will do you Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-508733 Share on other sites More sharing options...
BuddyHolly9 Posted January 22, 2023 Share Posted January 22, 2023 On 20/02/2021 at 00:06, al-yeti said: For DIY? A grade 1 Honeywell panel will do you Did you ever get this sorted? It would go into tamper but you can clear this. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-517647 Share on other sites More sharing options...
Kaden Posted May 27, 2023 Share Posted May 27, 2023 You could get a Vista 20p, there are some on eBay for about $200. Then you could just replace the keypads too with 6160s Link to comment https://www.thesecurityinstaller.co.uk/community/topic/44376-ademco-accord-keypad-removal-control-panel-battery-replacement/#findComment-519378 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now