Hi can anybody tell me how to wire this bell box to my system please;

https://drive.google.com/file/d/1A4OUu0BxuBjxROYUbVkzc-OAtPJcNPBi/view?usp=sharing

https://drive.google.com/file/d/17Mi56raLomz09ASqS1WjS2MyxesJ2ghE/view?usp=sharing

 

 

pasted to make it easier 

 

14 hours ago, PeterJames said:

pasted to make it easier 

 

You should leave this for engineers to sort out ......

7 hours ago, al-yeti said:

You should leave this for engineers to sort out ......

I did, I cant be rarsed with wires in holes anymore. I just thought if the pictures were there someone might actually help. Mind you I cant see the panel connections that well the picture is to poor  

TADB is easy....

 

What's hard is trying to think why he wants to keep an optima +2 

Well it's currently got +ve going into the bell -ve and the tamper linked out so it's a bit of a mess and no guarantees it's going to work properly.

It also looks like a 25+ year old  optima that would have been worth upgrading at the same time....

T tamp, A -ve, D +ve, B trig.

 

Hi I want to keep the optima 2 because it still works ok

The wires in the control panel are wired for the old bell box which still works but the cover is broken. That’s the only reason I want to change it.

 

It must be lucky/well looked after... Been a good while since I've seen one without black burning around the regulator, have the correct aux voltages and capable of charging the battery at a decent rate.

Yes I changed the battery about 2 years ago.