3 minutes ago, MrHappy said:

 

I had hiwatch camera on port 85 on the bench the other week & knew my work router to house router was working on port 85 in the past

 

it appears the controls do not take up the software changes until power cycled or a code in entered on the psychical keypad

 

however the downloading software still won't load on the intended win8 machine, the same file loads on my lenovo & acer laptops

 

there all 64 bit machines.... 

You opening a can of worms 

 

Let's talk about hiwatch, why you got that on the bench , re badging to hikvision only ? So it becomes pro stuff 

as this is public I will answer via PM

1 hour ago, MrHappy said:

should you change the banner text-

 

download it into the controls, the old banner is displayed until the user code is entered,

 

odd...

So any chance in switching to ion as your main panel or dropping the enforcer for this 

 

Scanny wireless have an all in one? Onboard keyboard jobby?

57 minutes ago, al-yeti said:

So any chance in switching to ion as your main panel or dropping the enforcer for this 

 

Scanny wireless have an all in one? Onboard keyboard jobby?

 

I like the square i-ion keypad & massive endsation

 

But won't be moving towards them.

6 hours ago, Logan said:

Still prefer enforcer 

True , DIY is good for you

27 minutes ago, Logan said:

Diy? I dont install this yellow peice of S***

But you are DIY ? DIY prices , DIY installs ? 

 

 

9 hours ago, MrHappy said:

 

I like the square i-ion keypad & massive endsation

 

But won't be moving towards them.

Eaton scantronic I know your reading this , helicopter above forum

 

You missed the boat , need all devices two way , I might have switched to ion aswell

 

Only reason they keep app platform free is because they probably collapse by now if they didn't 

 

 

Being NSI Gold goes way beyond how tidy the wiring is in the panel. that's likely down to one engineer and their untidy workmanship.

There is a whole company, employees. training, testing, maintenance and audit trail behind that job.

2 hours ago, Logan said:

Erm my installs are done better than some NSI gold companies    btw i dont use the enforcer unless i have to

I mainly still install wired systems of all the systems i installed i only used 1 enforcer panel as i wasn't able to run cables as the house was Newly decorated 

 

Is that battery dated ? 

If so why would you have to move the battery it to see the date ?

Those alarm cables marked?

Why have you got main & low voltage shoved though the same ungrommeted hole ?

Why is there no stress relief for the mains

 

If you wish to post an example of your specification that's when the proper fun starts... 

 

 

Quote

 

Terminal Allocations: A Relay (see p.xx-xx)

1 C contact

2 NC contact

3 NO contact

 

im guessing whatever is connected to A3 doesnt work very well?

 

also you have a .5mm 2 core flex whats that doing?