Hello,

I have some rope sensors installed on my rolling shutters.

I have a Risco Plus system. According to the handbook I set the "loop response" to "extra fast, 1ms". I would like to know if there is a recommended value for the pulse count value.

I can understand that it could depend on sensor brand but I'm figuring out if there is any value to be set that come from general experience.

 

Thank You

 

Regards

What's a 'rope' sensor? 

2 hours ago, james.wilson said:

What's a 'rope' sensor? 

I don't know what is exactly the name in english but here you are...

 

I have to admit I'm not entirely sure what *that* device is in English

 

Is it for an automatic roller door?

You have to connect the rope to the end of the shutter.

So as soon as the shutter moves the rope moves in or out to the device opening the circuit.

 

3 hours ago, mauog said:

You have to connect the rope to the end of the shutter.

So as soon as the shutter moves the rope moves in or out to the device opening the circuit.

 

Ok so this a movement detection device , fully compatible with bentel systems after a bit internet H stalking and Google translation 

 

 

 

https://www.ebay.co.uk/itm/ART471N-Sensore-a-fune-compatibile-Bentel-per-Antifurto-Tapparelle-avvolgibili-/182713252651

 

If you don't speak English , your phone should ask you to translate description to english

Edited August 6, 20196 yr by al-yeti

bet it costs a  lot more than 9448 ?

 

http://www.coopercsa.it/it/prodotti/componenti-sistemi-antifurto/contatti-avvolgibili/contatto-fune-avvolgibili-serie-471

10 minutes ago, MrHappy said:

bet it costs a  lot more than 9448 ?

 

http://www.coopercsa.it/it/prodotti/componenti-sistemi-antifurto/contatti-avvolgibili/contatto-fune-avvolgibili-serie-471

7 quid from eBay Italy if you can can get shipping deal done however you're right Eaton probably want 70 quid 7 quid from

Funny company that CSA, bought by Menvier early 90s just before they themselves got taken over by Scantronic I think.

 

Occasionally rebadged products have appeared over here usually prox related e.g. standalone door entry prox rebadged as a UK Menvier product and also the menvier keypad passive proxies were by that co. in Italy.

Edited August 6, 20196 yr by datadiffusion

1 hour ago, datadiffusion said:

Funny company that CSA, bought by Menvier early 90s just before they themselves got taken over by Scantronic I think.

 

Occasionally rebadged products have appeared over here usually prox related e.g. standalone door entry prox rebadged as a UK Menvier product and also the menvier keypad passive proxies were by that co. in Italy.

Eaton basher

Edited August 6, 20196 yr by datadiffusion
Updated my own quote!