Jump to content
Security Installer Community

Texecom Wireless Smoke Detector Problem


David N

Recommended Posts

10 minutes ago, al-yeti said:

Get a fire company in for a quote and get wallet out

 

Probably not going to help if it needs to be wired to make it the appropriate detector.

 

Wasted opportunity though having building work done and not putting wires in :(

 

13 minutes ago, al-yeti said:

Is the company specialising in intruder alarms or they jack of all trades ?

 

Nothing wrong with a mainly intruder co. doing domestic fire, after all the rules are pretty simple in private dwellings. But not knowing about smokes not being suitable for a Kitchen is a bit worrying.

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

36 minutes ago, datadiffusion said:

 

Probably not going to help if it needs to be wired to make it the appropriate detector.

 

Wasted opportunity though having building work done and not putting wires in :(

 

 

Nothing wrong with a mainly intruder co. doing domestic fire, after all the rules are pretty simple in private dwellings. But not knowing about smokes not being suitable for a Kitchen is a bit worrying.

Point behind intruder company 

 

Allot of them actually only have basic experience in fire , as the fire companies have basic experience in intruder 

 

Few smaller companies hold expertise in both when a problem occurs 

Just now, al-yeti said:

Point behind intruder company 

 

Allot of them actually only have basic experience in fire , as the fire companies have basic experience in intruder 

 

Few smaller companies hold expertise in both when a problem occurs 

 

 

Or they just to busy to give it real attention, small contract not being worth much

Link to comment
Share on other sites

To me it seems a case of using wireless for ease over considering the potential false alarms. If there wasn't an issue you wouldn't be concerned how they work.

The devices themselves are pretty decent in the correct environment, they are manufactured in partnership with Apollo. I have only seen one failure and that was a week after someone had all there internal doors off to sand and paint them.

 

Link to comment
Share on other sites

38 minutes ago, sixwheeledbeast said:

If there wasn't an issue you wouldn't be concerned how they work.

 

Id have to say given the opportunity I'd still to this day choose wired everytime, until the day batteries last 10 years+

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

On 26/07/2019 at 16:53, datadiffusion said:

 

Id have to say given the opportunity I'd still to this day choose wired everytime, until the day batteries last 10 years+

Some of the batteries are lasting less than a year.  They want a £60 visit fee every time one needs changing.  I have insisted that they are all changed on annual service.  One of the engineers told me that the system could be enabled for me to change a battery but the installers said this option wasn’t available. 

Link to comment
Share on other sites

I would leave it to the maintainer but batteries should last more than 2years. Manufacture spec may say much higher but I'd still go every other year. If its failing before that I'd replace the device. Also as your 7 years into device design its close

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

Link to comment
Share on other sites

9 hours ago, james.wilson said:

I would leave it to the maintainer but batteries should last more than 2years. Manufacture spec may say much higher but I'd still go every other year. If its failing before that I'd replace the device. Also as your 7 years into device design its close

 

Agreed 2 years is about right for a change and unless cheap nasty batts are being used all decent detectors should last 1yr + from real world experience.

 

Don't know in depth about Texe wireless but is it possible some detectors are not sleeping properly? Assume Ricochet types? I certainly had no issues with batteries

when I did the largeish Ricochet installation a few years back, in fact thinking about it I never had a single low battery in 2.5 years... (I usually change at 2 as well but it was a charity job

and I had access whenever I wanted). That was a mixture of PIRs, vibes and contacts.

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

5 minutes ago, David N said:

The Control4 system piggy backs PIRs to trigger auto lighting so I expect those to run down

 

Ah... so even though the C4 is connected via IP, the detectors are prevented from sleeping.

 

That's probably why then, I'm very surprised that is 'recommended' by Texe on the grounds of battery life.

 

 

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.